Install SunCluster3.1Update3 on VMWARE

Article title: install SunCluster3.1Update3 on VMWARE. Linux is a technology channel of the IT lab in China. Includes basic categories such as desktop applications, Linux system management, kernel research, embedded systems, and open source.
Sun Cluster has been available for x86 since 3.1 Update 2 (04/04. Therefore, it can be installed on VMWARE.
I installed one. Write the following Tips: I hope it will serve as an example. I wish you success!
　　
　　 A. Install Solaris:
1. use flarcreate to generate a flash archive in the original Solaris 9 x86
2. set a Jumpstart server, "cp/etc/bootrc/jumpstart/Solaris_9/Tools/Boot". Make sure to leave a partition as/globaldevices. 32 MB is enough.
3. create a new Solaris 9 x86 virtual machine and create two more virtual NICs, all of which are host-only
4. use the ISO file of the s9x86 install disk as the virtual disc to mount the new virtual machine
5. power up and press F2 to start from the "virtual disc ".
6. start from network 1. check the Ethernet address and update the Ethernet address of Jumpstart server/etc/ethers.
7. boot-install-w
　　
Solaris was soon cloned. Now install SC3.1u3.
　　
　　 B. Install SC 3.1 U3
1. mount the SC3.1 U3 ISO file
2. scinstall
3. create a new Cluster
4. add two nodes (now there is only one node, and the other node is fictitious, Xiang), Interconnect network selects pcn1 to pcn1, pcn2 to pcn2
5. reboot. now the cluster is in installmode.
6. delete fictitious nodes:
A. scsetup delete interconnect
B. scconf-r-h node2
7. force disable installmode: scconf-c-q installoff
　　
Now you get a single-node Cluster. you can continue to join the data service and test these services.