Linux Nic array card Installation

Linux Nic array card installation-Linux Enterprise Application-Linux server application information. For details, refer to the following section. I recently want to learn about the linux installation array, but I have never had the chance to experiment. So I recently copied a lot of articles on the linux installation array. (if the original author finds that he does not agree to repost the array, notify me to delete it)

The problem is:

When I was studying a diskless software, I mounted an array to a hardware array card. Then install the server system LINUX. LINUX also recognizes the array card. However, a single disk of the array is also in the same format as the partition in a single disk. (I mounted the array to WINDOWS and divided it into NTFS partitions ). The array is still in use and the partition is also NTFS array named DM0, but only one disk in a single disk is NTFS. if you have read this article and are familiar with LINUX, thank you for your reference.

If the ServeRAID SCSI controller is added, install it as follows:
1. Download the driver from the ServeRAID disc or on the website to create a drive floppy disk;
2. Insert the floppy disk into the server, enter the following command, and press Enter:
Mount-t vfat/dev/diskettedevicefile/mnt/floppy
Here, diskettedevicefile refers to the identifier of the drive device, which is generally fd0.
3. Enter the following command and press Enter:
Cd/mnt/floppy
4. Enter the following command and press Enter:
Sh *. sh
*. Sh is the shell file ending with sh in the drive floppy disk. For the specific file name, view the corresponding floppy disk.
5. Enter the following command and press Enter:
Cd/
6. Enter the following command and press Enter:
Umount/mnt/floppy
7. Remove a floppy disk from a floppy disk;
8. Enter the command and press enter to restart the server:
Shutdown-r now