Linux theft ?? Set (1394 usage)

Article Title: Linux theft ?? Set to 1394 ). Linux is a technology channel of the IT lab in China. Includes basic categories such as desktop applications, Linux system management, kernel research, embedded systems, and open source.
　　 Testing Equipment:
H/W: MS-6340 (M/B) 'MS-6932 (IEEE-1394 Card)
O.S: Linux (RedHat 7.1)
Test device: SONY DCR-PC110 (IEEE 1394)
Software utility:
Libraw 1394_0.9.0
Dvgrabe 1.0
Libdc1394-0.8.2
Kernel 2.4.6 or latest version (2.4.6 recommanded)
Pgk-config 0.8.0
　　
　　 Installation steps:
1. Same IEEE-1394 H.D Article 1 ~ 2. No nonsense.
　　
2. When you start make Kernel, select prompt for the code maturity leave options.
Development and/or incomplete code/drivers.
　　
3. When making kernel, In the IEEE 1394 section, select Ieee 1394 support 'ohci support 'video 1394 support 'Raw IEEE1394 I/O support.
　　
4. Do not forget to select SCSI support. After setting the Kernel, make kernel. And then set the new kernel to boot. the IEEE 1394 module can be loaded.
　　
5. After Entering Linux with the new Kernel, decompress Libraw 1394_0.9.0:
Tar zxvf libraw1394_0.9.0.tra.gz
Cd libraw1394-0.9.0
INSTALL
Make dev
Reboot linux
　　
6. Then decompress the Libdc1394-0.8.2:
Tar zxvf libdc1394-0.8.2.tra.gz
Cd libdc1394-0.8.2
INSTALL
./Configure
Make
Make install
　　
7. decompress the pgk-config-0.8.0
Tar zxvf pgkconfig-0.8.0.tar.gz
Cd pgkconfig-0.8.0
INSTALL
./Configure
Make
Make install
　　
8. Install Drgrabe:
Tar zxvf dvgrabe-1.0.tar.gz
INSTALL
./Configure
Make
Make install
　　
9. Then, under/usr/local/bin, type./dvgrabe? Frames 200 qa. Note: This command is intended to test the recording mode in which Dvgrabe receives the control file D. V. After recording, a qa. avi file is displayed.
　　
10. A qa. avi file is generated. We can dial the recorded files under Linux or Microsoft O.S to see if they can be played and whether the content is correct.
　　
11. Similarly, go to X-Windows to use Gscanbus to verify the IEEE1394 bus connection status:
Download gscanbus-0.7.1.tgz
Tar zxvf gscanbus-0.7.1.tgz
Cd gscanbus-0.7.1
INSTALL
After hitting./gscanbus, the connected device can be displayed on X-Windows, and Gscanbus can also reflect the situation of Hot-plug in real time.
　　
　　 Conclusion:
With Linux + sony d. V + IEEE 1394 H.D =? You can imagine how to do things that make sense and don't waste time.
I have asked a Coriander A.P maintainer about the information related to the establishment of IEEE 1394 Device for your reference:
　　
Hello,
You need to build the devices, of course. This can be done like this:
Mknod-m 666/dev/raw1394 c 171 0
Mknod-m 666/dev/video1394 c 172 0
　　
Damien Douxchamps
(°-PhD Student/Research Assistant
// \ Image Processing Group, Telecom Laboratory, UCL, Belgium
V _/_