Meizu MX3 Phone Firmware upgrade method

1. Normal mobile phone brush, upgrade the method of firmware

I'm 3.5 liters today, 4.2.8 the firmware is damaged, and I'm looking for customer service.

Be sure to use the computer under the 3.8 firmware and then press and hold the power on and volume + into the brush mode and connect the computer
The computer will give you a 900MB disk to pull in and pull it off, then you can disconnect the computer and then brush the machine Mode 2 option points
You can go up to 3.8. You can upgrade 4.2.8 firmware directly in the document
4.5 firmware can also be upgraded directly in the documentation

2. Phone screen is broken, can not touch, mobile phone firmware upgrade Method

The solution is as follows:
1, in the hand machine or restart the state, the first long press the volume plus key and then long press the Power key, the appearance of Meizu signs and release,
Bring the phone into the upgrade interface (recovery mode).
2, after the interface, connected to the computer via a USB cable, will recognize the emergence of a volume labeled Recovery Removable Storage disk.
3. Place the firmware into the root directory of the disk. (Note: There is no need to modify the firmware file name and suffix.) ）
4, disconnect, tick the system update, click on the bottom right corner of the screen "start", complete the verification of the firmware file will automatically enter the process of the brush machine.
The Tips1:recovery interface can be moved up and down via the volume key and confirmed by the power key.
Tips2:recovery interface quickly press the volume of the key 5 times, the volume of the key 5 times (reverse order can be reversed),
Enter the Easter egg pattern to erase all data from your phone. Data honesty is valuable, if no special needs are not recommended to use.
5, a few minutes later, see the System Welcome interface, update completed.

Meizu MX3 Phone Firmware upgrade method