NETGEAR RND2000 disk array cabinet reset

Http://readynas.netgear.cn/download/intelligent_management.asp

NETGEAR RND2000 Short Reset.

Close the ReadyNAS.

Find the small hole where the reset key is located, ReadyNAS Duo is on the back of the device and has a "reset" callout.

After turning off the device, use an object such as a PIN to hold the reset key in the hole and then turn on the ReadyNAS to ensure that the reset key is continuously pressed for about 8 seconds.

After 8 seconds, you will see all the hard drive LEDs on the front panel blink at once and release the Reset key.

Check the power light status.

Do not reset time can not be too long, about 8 seconds, if the continuous press 30 seconds, ReadyNAS restore factory settings, all settings and data will be cleared!!!

After initialization, the device IP is the IP address that DHCP needs to find the device with Raidar_win.

Initialize device: Http://ip/admin user name: admin password: netgear1

This article is from the "@ Fast unblocked @" blog, make sure to keep this source http://speediness.blog.51cto.com/760841/1789386

NETGEAR RND2000 disk array cabinet reset