The script consists of statements, which are implemented by Process control, and this section mainly describes the use of several keywords.
ElseIf
elseif
And else if
The behavior is exactly the same, if you use a colon to define the if/elseif
condition, then you can not use two words else if
, or PHP will produce parsing errors.
$a = 1;$b = 2;if($a > $b) :echo"$a is greater than $b";elseif($a == $b) :echo"$a equals $b";else :echo"$a is neither greater than or equal to $b";endif;
Alternative syntax
The following keywords can use the alternative syntax for process control, with the basic form of replacing the left curly brace with a colon and closing curly brackets for the following characters.
ifendifwhileendwhileforendforforeachendforeachswitchendswitch
Attention! PHP does not support mixing of two syntaxes within the same control block.
Do-while
The loop looks familiar at first glance, but ignores some of its usage.
The handbook says that senior C users may be familiar with another different do-while
circular usage, putting statements in do-while(0)
. I have heard of this technique for the first time, it seems I am still a C language small white.
By the way, search do-while(0)
for the benefits of this particular usage.
- Code chunking is more intuitive than just using curly braces.
- Use
break
skipping over the remaining piece of code.
- Useful for macro definition functions, using the end of the sentence can be a semicolon, looks more like a function call.
- Block-level scopes, which prevent variable names from spreading to the upper scope.
- The deformed
goto
statement.
This post is very good, do{}while (0) Role-C + +-Segmentfault.
Foreach
foreach
Can only be applied to the traversal of arrays and objects. The foreach
syntax structure provides a simple way to iterate through an array, with the following two syntaxes.
foreachas$value)statementforeachas$key$value)statement
To modify the value of an array element, you need to use a reference assignment, which is implemented by the $value
preceding addition &
.
$arr = array(1, 2, 3, 4);foreach($arras &$value) {$value = $value * 2;}unset($value);foreach($arras$value) {echo"$value "; // 2 4 6 8}
Attention! The reference to the last element of the array $value
foreach
remains after the loop, and unset()
it is recommended to use it for destruction.
List-each
In the example program, a special traversal method is also found, which is called list-each
.
When foreach
execution begins, the pointer inside the array automatically points to the first cell, so it does not need to be foreach
called before the loop reset()
. while
in the case of list-each
, however, the inner pointer of the array $arr
is always there, so it needs to be before the next loop reset($arr)
.
$arr = array('one', 'two', 'three');// reset($arr);while(list($key, $value) = each($arr)) {echo"Key: $key; Value: $value ";}reset($arr);while(list($key, $value) = each($arr)) {echo"Key: $key; Value: $value ";}
In the above code, the first one reset
can be omitted, but the second one reset
cannot be saved.
List
PHP 5.5 adds the ability to iterate through an array of arrays and unpack the nested array into the loop variable.
$array = [[1, 2],[3, 4],];foreach($arrayaslist($a, $b)) {echo"A: $a; B: $b";}
list()
The cells in the cell can be less than the nested arrays, and the extra array cells are ignored. If more than, an error message will be issued.
Break
break
Used to end for/foreach/while/do-while/switch
the execution of the current structure. break
you can accept an optional numeric parameter to decide to jump out of a few loops, but the argument cannot be a variable.
break
Jump out of the multi-loop or the first encounter, deliberately wrote a small program to try a bit.
while(1) {while(1) {echo'hello ';break2;}}echo'world';
Specially in C language to try a bit, prompt syntax error.
Continue
break
Similarly, continue
you can also accept an optional numeric parameter to decide to skip a few loops to the end of the loop.
Attention! Statements in PHP are switch
considered to be continue
a looping structure that can be used.
Switch
The manual says that PHP differs from other languages in that the function continue
of the statement switch
is similar break
. What does that mean?
switch/case
Doing is loosely compared ==
, not strictly compared ===
. In terms of efficiency, the switch
conditions in the statement are only one time and are used to compare with each case
statement. An case
expression can be any expression that evaluates to a simple type and cannot be used with an array or an object. Semicolons case
are allowed in place of the statement after a semicolon is used.
Declare
declare
The structure is used to set the execution instruction of a piece of code, the syntax structure is as follows:
declare(directive)statement
directive
section allows declare
to set the code snippet behavior, currently only two commands are known: ticks
and encoding
. declare
structs can also be used for global scope, affecting all code after expiration. However, if a declare
structured file is contained by another file, it does not work for the parent file that contains it.
Tick (clock cycle) is an event that occurs in a declare
code snippet when an interpreter executes n a low-level statement that can be timed. The events that appear in each tick are register_tick_function()
specified by the. The usage is broadly as follows.
declare1);functiontick_handler(){echo"tick_hander() called.\n";}register_tick_function('tick_hander');
There are a number of low-level statements that can be timed, a periodic event is register_tick_function()
invoked after each statement, and a periodic event is invoked at the end of the curly brace.
Note that the expressions in PHP cannot be separated by commas, or syntax errors will occur. This is different from the C language, just noticed.
You can use the encoding directive to specify how each script is encoded. Use the following:
declare'ISO-8859-1);
Return
If it is called at the global scope, the current script file aborts the run. If the current script file is include
either or require
, control is returned to the calling file. If the current script is being used include
, then return
the value is treated as the include
return value of the call, then require
?
Require
require
And include
almost exactly the same, in addition to handling the failure in a different way.
require
The script aborts when a level error occurs on an error E_COMPILE_ERROR
. Instead include
E_WARNING
, only a warning is generated and the script continues to execute.
Include
include
Statement to include and run the specified file, note the search order for the specified file.
- The included files are searched first by the path given by the parameters. If a path is defined,
include_path
it is completely ignored.
- If no directory (only file name) is given, it is searched according to
include_path
the specified directory. If you do not find it, look in the directory where the script file is located and the current working directory. So the question is, what is the difference between the directory where the script file is called and the current working directory?
- If the file is not finally found, the
include
structure emits a warning that the require
structure will emit a fatal error.
When a file is contained, it contains code that inherits the include
range of variables in the row. From there, the variables defined in the called file can be used in the calling file. When a file is included, the parser goes out of PHP mode at the beginning of the target file and enters HTML mode, replying to the end of the file.
For the return value, include
returns and warns when a failure occurs FALSE
. A successful inclusion returns 1 unless the return value is also given in the included file. If a function is defined in the include file, these functions can be return
used independently of the master file, either before or after it is defined.
If the files from the remote server should run at the far end and only output the results, use the readfile()
function better. Another way to include a PHP file in a variable is to capture its output with an output control function include
. The first time encountered, more unfamiliar. The following code can vars.php
output the content returned in the script.
$string = get_include_contents('vars.php');functionget_include_contents($filename){if(is_file($filename)) {ob_start();include$filename;$contents = ob_get_contents();ob_end_clean();return$contents;}returnfalse;}echo$string;
Because include
and require
is a special language structure, its parameters do not need parentheses. If the file is included two times, PHP will make a fatal error because the function is already defined. Recommended Use include_once
.
Require_once
require_once
Statements and require
statements are identical, the only difference being that PHP checks if the file has already been included, and if it does, it will not be included again.
Include_once
include_once
Statements and include
statements are similar, the only difference is that if the file has already been included, it will not be included again.
Goto
goto
The operator is used to jump to another location of the program, and the target location can be marked with a colon for the target name. goto
There are certain restrictions in PHP where the target location can only be in the same file and scope. That is, you cannot jump out of a function or class method, or you can skip into any loop or switch
structure.
(End of full text)
On the process control and its implementation in the speech of PHP
The script consists of statements, which are implemented by Process control, and this section mainly describes the use of several keywords.
ElseIf
elseif
And else if
The behavior is exactly the same, if you use a colon to define the if/elseif
condition, then you can not use two words else if
, or PHP will produce parsing errors.
$a = 1;$b = 2;if($a > $b) :echo"$a is greater than $b";elseif($a == $b) :echo"$a equals $b";else :echo"$a is neither greater than or equal to $b";endif;
Alternative syntax
The following keywords can use the alternative syntax for process control, with the basic form of replacing the left curly brace with a colon and closing curly brackets for the following characters.
ifendifwhileendwhileforendforforeachendforeachswitchendswitch
Attention! PHP does not support mixing of two syntaxes within the same control block.
Do-while
The loop looks familiar at first glance, but ignores some of its usage.
The handbook says that senior C users may be familiar with another different do-while
circular usage, putting statements in do-while(0)
. I have heard of this technique for the first time, it seems I am still a C language small white.
By the way, search do-while(0)
for the benefits of this particular usage.
- Code chunking is more intuitive than just using curly braces.
- Use
break
skipping over the remaining piece of code.
- Useful for macro definition functions, using the end of the sentence can be a semicolon, looks more like a function call.
- Block-level scopes, which prevent variable names from spreading to the upper scope.
- The deformed
goto
statement.
This post is very good, do{}while (0) Role-C + +-Segmentfault.
Huaian whipped Egg Download (http://www.gamefrye.com/)
Foreach
foreach
Can only be applied to the traversal of arrays and objects. The foreach
syntax structure provides a simple way to iterate through an array, with the following two syntaxes.
foreachas$value)statementforeachas$key$value)statement
To modify the value of an array element, you need to use a reference assignment, which is implemented by the $value
preceding addition &
.
$arr = array(1, 2, 3, 4);foreach($arras &$value) {$value = $value * 2;}unset($value);foreach($arras$value) {echo"$value "; // 2 4 6 8}
Attention! The reference to the last element of the array $value
foreach
remains after the loop, and unset()
it is recommended to use it for destruction.
List-each
In the example program, a special traversal method is also found, which is called list-each
.
When foreach
execution begins, the pointer inside the array automatically points to the first cell, so it does not need to be foreach
called before the loop reset()
. while
in the case of list-each
, however, the inner pointer of the array $arr
is always there, so it needs to be before the next loop reset($arr)
.
$arr = array('one', 'two', 'three');// reset($arr);while(list($key, $value) = each($arr)) {echo"Key: $key; Value: $value ";}reset($arr);while(list($key, $value) = each($arr)) {echo"Key: $key; Value: $value ";}
In the above code, the first one reset
can be omitted, but the second one reset
cannot be saved.
List
PHP 5.5 adds the ability to iterate through an array of arrays and unpack the nested array into the loop variable.
$array = [[1, 2],[3, 4],];foreach($arrayaslist($a, $b)) {echo"A: $a; B: $b";}
list()
The cells in the cell can be less than the nested arrays, and the extra array cells are ignored. If more than, an error message will be issued.
Break
break
Used to end for/foreach/while/do-while/switch
the execution of the current structure. break
you can accept an optional numeric parameter to decide to jump out of a few loops, but the argument cannot be a variable.
break
Jump out of the multi-loop or the first encounter, deliberately wrote a small program to try a bit.
while(1) {while(1) {echo'hello ';break2;}}echo'world';
Specially in C language to try a bit, prompt syntax error.
Continue
break
Similarly, continue
you can also accept an optional numeric parameter to decide to skip a few loops to the end of the loop.
Attention! Statements in PHP are switch
considered to be continue
a looping structure that can be used.
Switch
The manual says that PHP differs from other languages in that the function continue
of the statement switch
is similar break
. What does that mean?
switch/case
Doing is loosely compared ==
, not strictly compared ===
. In terms of efficiency, the switch
conditions in the statement are only one time and are used to compare with each case
statement. An case
expression can be any expression that evaluates to a simple type and cannot be used with an array or an object. Semicolons case
are allowed in place of the statement after a semicolon is used.
Declare
declare
The structure is used to set the execution instruction of a piece of code, the syntax structure is as follows:
declare(directive)statement
directive
section allows declare
to set the code snippet behavior, currently only two commands are known: ticks
and encoding
. declare
structs can also be used for global scope, affecting all code after expiration. However, if a declare
structured file is contained by another file, it does not work for the parent file that contains it.
Tick (clock cycle) is an event that occurs in a declare
code snippet when an interpreter executes n a low-level statement that can be timed. The events that appear in each tick are register_tick_function()
specified by the. The usage is broadly as follows.
declare1);functiontick_handler(){echo"tick_hander() called.\n";}register_tick_function('tick_hander');
There are a number of low-level statements that can be timed, a periodic event is register_tick_function()
invoked after each statement, and a periodic event is invoked at the end of the curly brace.
Note that the expressions in PHP cannot be separated by commas, or syntax errors will occur. This is different from the C language, just noticed.
You can use the encoding directive to specify how each script is encoded. Use the following:
declare'ISO-8859-1);
Return
If it is called at the global scope, the current script file aborts the run. If the current script file is include
either or require
, control is returned to the calling file. If the current script is being used include
, then return
the value is treated as the include
return value of the call, then require
?
Require
require
And include
almost exactly the same, in addition to handling the failure in a different way.
require
The script aborts when a level error occurs on an error E_COMPILE_ERROR
. Instead include
E_WARNING
, only a warning is generated and the script continues to execute.
Include
include
Statement to include and run the specified file, note the search order for the specified file.
- The included files are searched first by the path given by the parameters. If a path is defined,
include_path
it is completely ignored.
- If no directory (only file name) is given, it is searched according to
include_path
the specified directory. If you do not find it, look in the directory where the script file is located and the current working directory. So the question is, what is the difference between the directory where the script file is called and the current working directory?
- If the file is not finally found, the
include
structure emits a warning that the require
structure will emit a fatal error.
When a file is contained, it contains code that inherits the include
range of variables in the row. From there, the variables defined in the called file can be used in the calling file. When a file is included, the parser goes out of PHP mode at the beginning of the target file and enters HTML mode, replying to the end of the file.
For the return value, include
returns and warns when a failure occurs FALSE
. A successful inclusion returns 1 unless the return value is also given in the included file. If a function is defined in the include file, these functions can be return
used independently of the master file, either before or after it is defined.
If the files from the remote server should run at the far end and only output the results, use the readfile()
function better. Another way to include a PHP file in a variable is to capture its output with an output control function include
. The first time encountered, more unfamiliar. The following code can vars.php
output the content returned in the script.
$string = get_include_contents('vars.php');functionget_include_contents($filename){if(is_file($filename)) {ob_start();include$filename;$contents = ob_get_contents();ob_end_clean();return$contents;}returnfalse;}echo$string;
Because include
and require
is a special language structure, its parameters do not need parentheses. If the file is included two times, PHP will make a fatal error because the function is already defined. Recommended Use include_once
.
Require_once
require_once
Statements and require
statements are identical, the only difference being that PHP checks if the file has already been included, and if it does, it will not be included again.
Include_once
include_once
Statements and include
statements are similar, the only difference is that if the file has already been included, it will not be included again.
Goto
goto
The operator is used to jump to another location of the program, and the target location can be marked with a colon for the target name. goto
There are certain restrictions in PHP where the target location can only be in the same file and scope. That is, you cannot jump out of a function or class method, or you can skip into any loop or switch
structure.
(End of full text)
The above describes the PHP voice in the process of control and implementation methods, including the aspects of the content, I hope that the PHP tutorial interested in a friend helpful.