Solution for Nvidia graphics card failure when the Fedora19 kernel is upgraded to 3.10

When the Fedora19 kernel is upgraded to 3.10, the Nvidia graphics card cannot work. today, after the Fedroa19 kernel is upgraded to 3.10, the graphic interface still cannot be accessed. you need to install the Nviida graphics card again. The strange thing is that the driver cannot be compiled this time... when the Fedora19 kernel is upgraded to 3.10, the Nvidia graphics card cannot work. today, after the Fedroa19 kernel is upgraded to 3.10, the graphic interface still cannot be accessed. you need to install the Nviida graphics card again. The strange thing is that the driver couldn't be compiled this time. It used to be normal! "Failed to start wait for plymouth Uth boot screen to quit" is displayed on the black screen! After alt + 2 entered, all kinds of attempts failed. finally, g again found that we still need to patch the goods. Decisive command: 1 wget https://bugzilla.kernel.org/attachment.cgi? Id = 102881-O Linux-3.10.patch1./NVIDIA-Linux-x86_64-319.17.run-x; cd NVIDIA-Linux-x86_64-319.17 & patch-p1 <../Linux-3.10.patch1./nvidia-installer anxiously waits until the compilation is successful and finally pends .. By the way, attach nouveau video card disabling method: 1vi/etc/default/grub add nouveau at the end of "GRUB_CMDLINE_LINUX. modeset = 0 to regenerate grub. conf 1grub2-mkconfig-o/boot/grub2/grub. cfg check whether 1cat/etc/grub2.cfg has been added to the parameter | grep nouveau. modeset = 01 init 32. /NVIDIA-Linux-x86_64-319.17.run is 08 years of Thinkpad T61 DE9, the graphics card is Nvidia Quadro NVS140M.