Start from here to learn about Embedded Linux kernel development-general Linux technology-Linux programming and kernel information. The following is a detailed description.
The following are some of the works independently designed by Mr. Wang honghui for over 10 years of work and study:
Among them, the complete set of materials for works other than BCM91250 high-end server (including the Protel99se version of the schematic, PCB diagram, JTAG download and write source code, transplanted uClinux source code, and Linux cross compiling environment) are all collected in the embedded system Linux kernel development practices guide (ARM platform) the purpose of CD included in this book is to allow readers to take this book as a guide and use or refer to the documents in CD to start learning embedded system Linux kernel development from the first step until they are proficient!
[Table = 98%] [tr] [td =]
Embedded System Linux development practice guide (ARM platform)
[/Td] [/tr] [tr] [td = 2, 1]
Embedded System Linux kernel Development Practice Guide (ARM platform)
Four parts, chapter 32, more than 1100 pages, published by the Electronics Industry Publishing House, to be listed soon
[/Td] [/tr] [tr] [td = 2, 1]
BCM91250 (MIPS64) embedded high-end server (except PCB wiring)
[/Td] [/tr] [tr] [td]
(400) {this. resized = true; this. width = 400; this. alt = 'click here to open new window';} "onmouseover =" if (this. resized) this. style. cursor = 'hand'; "onclick =" window. open ('HTTP: // www.931226.com/images/1250.gif'); ">
[Img = 300,150] http://www.931226.com/images/mips.gif?/img=#/td?#td=cpu: BCM1250, dual-core, 64-bit, MIPS64 Architecture
Frequencies: 800 MHz
Flash: 2 MB
DDR1: Four ddr dim slots, 400 MHz
Serial Port: ttyS0, ttyS1
E2PROM: 16 KB
3 10 M/100 M/M Adaptive Ethernet ports
VFD Display Module
2 USB hosts
4 3.3 V/64-bit/66 MHz PCIe Slots
1 IDE Interface
Standard PC motherboard size
Standard pc atx Power Supply
Standard 1U, 2U, 4U or tower Chassis
Linux-2.4.21
Webserver, ISCSI, sqlite
Other general Linux software
Connect an optical drive and an IDE hard drive on the IDE Interface
Place the system installation disk into the optical drive
One command to complete system installation
The kernel can be installed in flash or IDE hard drive.
The file system is installed on the IDE hard disk.
If the PCIe slot is inserted into the scsicard to connect to the SCSI hard disk
You can also install the system on a SCSI disk.
[/Td] [/tr] [tr] [td = 2, 1]
Amateur self-made simple JTAG download and write Cable
[/Td] [/tr] [tr] [td] [img = 290,215] http://www.931226.com/images/wigler.jpg#/img%#/td%%td%wiglercompatible JTAG Cable
With the OCD debugger,
Flash programmer,
IAR and other tool software
Combined Use
The connection diagram is as follows:
[Img = 212,156] http://www.931226.com/images/debug.jpg#/img]
[/Td] [/tr] [tr] [td = 2, 1]
Amateur self-madeCloud4510b Development Board
[/Td] [/tr] [tr] [td] [img = 293,220] http://www.931226.com/images/4510f.jpg#/img%#/td%%td%cpu: 89c4510
Flash: 2 MB
SDRAM: 16 MB
RS232: ttyS0, ttyS1
E2PROM: 4KB
Size: 156x118
Operating frequency: 50 MHz
10 M/M Adaptive Ethernet port
1 485 interface (switch from ttyS1)
Two HDLC Interfaces
One USB Device interface
1 192x64 lattice LCD interface
1-way stereo output
2-channel single-channel output
1-way MIC Input
UClinux-2.4.20
[/Td] [/tr] [tr] [td = 2, 1]
Amateur self-madeMC68VZ328 (DragonBall) Development Board
[/Td] [/tr] [tr] [td] [img = 165,100] http://www.931226.com/images/68vz328.gif#/img%#/td%%td%cpu: MC68VZ328
Flash: 2 MB (up to 16 MB)
SDRAM: 16 MB (up to 64 MB)
Serial Port: ttyS0, ttyS1
E2PROM: 4KB
Size: 130x100
Operating frequency: 33 MHz
Standard LCD and touch screen driver Interfaces
Buzzer
24-way I/O
UClinux-2.4.20
Dial-up Internet access
FTP upload and download
[/Td] [/tr] [/table] [table = 98%, # ffffff] [tr] [td] [/td] [/tr] [/table]
Teacher Wang Hong Hui embedded Linux training: http://www.931226.com
