The server can connect successfully, but in the browser cannot open any Web site, this problem is usually installed what software caused by IE settings made changes or the server is caused by the virus, or the server's DNS settings is wrong.
First, check the server DNS is correct
Server DNS is its own to resolve the domain name, if the DNS error, the server can not resolve the domain name, then the server can not access the site.
1. Run the ncpa.cpl command in CDM or run
2. Local Connection Properties
C, checked--Tcp/ipv4--Properties
D. Modify the DNS of the server
Commonly used DNS has 8.8.8.8 114.114.114.114 8.8.4.4 114.114.115.115 202.96.128.86 202.96.134.133, any write 2 DNS on it, you can change the test , but be aware that you can only modify DNS, and you cannot modify the IP address and gateway, subnet mask, or the network may be disconnected .
After modifying DNS, if the browser can not access the site, we have to modify the security settings under the browser to try.
Note:
After viewing, our server's original DNS is 100.95.2.29,100.95.2.7, modified to 8.8.8.8,8.8.4.4 after the normal resolution of the domain name online.
Second, modify the browser security settings
The following is an example of IE, open IE browser, on the menu bar--Tool--internet options:
If you do not use IE to restore the default settings will not be able to access the site, only re-install the operating system, the server is 99% is poisoned.
The server can connect remotely, the network connection is normal, but the external domain name ping does not pass, the browser cannot open the website