Ubuntu10.10 connect to the campus network through ruijie

Ubuntu 10.10 is installed. The installation method is as simple as installing software. This article will not go into details about how a campus network user uses ruijie to access the Internet. 1. Required Software: 1. xrgsu (Linux version of ruijie) 2. libstdc ++ platform 2. Operating System:

After Ubuntu 10.10 is installed, the installation method is as simple as installing software. This article will not go into details about how a campus network user uses ruijie to access the Internet.

I. Required software:

1. xrgsu (Linux version of ruijie)

2. libstdc ++ 5_3.3.6-20_i386.deb

3. libpcap0.8 _ 1.1.1-2_i386.deb

4. gcc-3.3-base_3.3.6-10_i386.dbe

Ii. Operating System:

Ubuntu 10.10 (32-bit)

Iii. 1. Since you can choose an operating system, namely Windows 7 and Ubuntu, all the operations in this article are carried out under Ubuntu.

2. In addition, some operations in this article will prompt you to enter the password. Please enter the system administrator password you set.

Iv. Procedure:

1. Download the above four software, double-click to install the software 2nd, 3, 4, namely libstdc ++ 5_3.3.6-20_i386.deb and libpcap0.8 _ 1.1.1-2_i386.deb and gcc-3.3-base_3.3.6-10_i386. The installation prompt may appear when you install a software. Make sure to reinstall the software.

2. press Alt + F2 and enter gksu in the displayed dialog box. In the administrator run dialog box that is enabled, enter nautilus. Call the root dedicated File Manager, copy the downloaded software xrgsu to the file system/usr/local/bin.

3. Open the terminal and enter the following command:

Sudo ln-s/usr/lib/libpcap. so.0.8 (Space)/usr/lib/libpcap. so.0.6.2 (Press ENTER) sudo chmod 744/usr/local/bin/xrgsu (Press ENTER)

Enter y as prompted and press Enter.

4. Run ruijie for Linux:

Enter sudo xrgsu directly in the terminal (Press ENTER)

5. Enter the configuration phase and enter the following methods line by line:

A. please input your user name:

Enter the authentication username for the software request

B. please input your password:

Enter the authentication password for the software request

C. Use DHCP, 1-Use, 0-UnUse (Default: 0): 1

If the operating system uses DHCP to obtain the Dynamic Address, select 1. Otherwise, select 0.

D. Use default auth parameter, 0-Use 1-UnUse (Default: 0): 0

Whether to use the default parameter for authentication. If you select 0, the default parameter will be used for authentication. e, f, g, and h will not appear in the future.

E. please input Eap-start Timeout (Default: 30 s): 30

Enter the timeout time of the Eap-start message, in seconds.

F. please input Eap-response Timeout (Default: 30 s): 30

Enter the timeout time of the Eap-Response message, in seconds

G. please input Eap-packet resend Time (Default: 3): 3

Enter the number of retransmission packets

H. Use Red-Giant private MAC? 1-Use, 0-UnUse (Default: 1): 1

Whether to use the private multicast address of starnet ruijie for authentication. If you select 0, the software uses the 802.1x Standard multicast address for authentication.

Searching server...

Connecting server...

Authenticating...

Authenticate SUCCESSFULLY! // SUCCESSFULLY! Indicates that the link is successfully connected.

Please input 'unauth' to LogOff: // you can access the Internet.

6. When Authenticate successfully appears, it indicates that the connection is successful. Click the browser to check whether the network can be connected. If not, left-click the panel.

Click Auto eth0, and the page will show that Auto eth0 is connected. Then open the webpage and try again.

7. In addition, it is said that MentoHUST can also be used in the campus network. Once ruijie succeeds, it will not try again. If you are interested, you can try it.

PS...