Use the system to create xorg. conf files in Ubuntu

In Ubuntu, the xorg. conf file is created by the system. Ubuntu has no built-in xorg. conf file since 9.10. If the user's screen resolution or refresh frequency needs to be adjusted, there is no corresponding resolution and frequency in X (for example, I installed Ubuntu10.04, the display cannot be identified, the highest fit... use the system to create xorg. the conf file Ubuntu has no built-in xorg since 9.10. conf file. If the user's screen resolution or refresh frequency needs to be adjusted, X does not have the corresponding resolution and frequency (for example, I installed Ubuntu10.04, and the display cannot be identified, the most suitable resolution is 800 × 600, and the refresh frequency is also very low. The maximum resolution is 60Hz, which seems very unaccustomed.) xorg cannot be found in the system. conf file. you can only create xorg. conf file. The problem is that someone, like me, belongs to the Cainiao category and does not know how to write the content. It doesn't matter. Ubuntu provides a solution created by the system. The procedure is as follows: 1. Generally, the xorg. conf file cannot be created directly under X. you must press Ctrl + Alt + F1 to enter the command line interface, and disable X: sudo service tpd stop. 2. run the sudo Xorg-configure command to create the xorg. conf. new file ~ Directory. 3. you can start X: sudo service running gps_start first, or move or copy the file to the/etc/X11 Directory. of course, the name must be changed to xorg. conf: mv ~ /Xorg. conf. new/etc/X11/xorg. conf. The next step is to use the gtf command to obtain the relevant parameters. I will not introduce them here. go to the Internet to search for them.