1. Download and install VirtualBox
Official website: http://www.virtualbox.org/wiki/Downloads
2. Download android-x86
Official website: http://www.android-x86.org/download
Here we download the 5.1 stable version
3. Create a new VirtualBox virtual machine and configure it
Once created, follow these steps:
Right-click Settings-System, modify pointing device for PS/2 mouse
Display: Video memory is set to maximum and 3D acceleration is enabled
Network: modified to bridge network adapter (default NAT mode host cannot access virtual machine)
4. Installing android-x86
Double-click to open the virtual machine created above and load the Android-x86-5.1-rc1.iso image as follows
The first 3 discs start the android-x86 system without installation. We select the last item, enter to start the installation, as follows
Then select the second item and create a new partition, as follows
Select No, enter
Select New->primary, default size, carriage return, as follows
Select bootable as the boot partition, enter as follows
Select Write Enter, then fill in Yes and enter to write all of the above operations to disk, as follows
Then quit, go back to the installation screen, select the first item sda1, enter
Partition format We choose ext3here, the official recommended NTFS, but the actual Test selection NTFS system fails to start.
Yes
GRUB, which is the boot interface when booting the system, Yes
EFI GRUB2, select Skip
Yes
Writing in progress:
Installation successful, Reboot, reboot
This will still load the ISO into the system installation interface, because we have not removed the virtual disk, click Remove Virtual Disk, and then control and restart
Smooth access to GRUB, select the first startup android-x86
Select Simplified Chinese, then click on the ABCD four locations on the screen, so you can skip the Setup Wizard, as follows
Then go to the desktop, as follows
Below, we can debug the Android program at random on the PC ~
VirtualBox Installation Android-x86 Detailed