Vro remote configuration and update based on linux Network

I. In reality, the vrotelnet is remotely controlled through telnet. configuration steps: 1: enter config in the vro

I. perform remote control over the vrotelnet through telnet. configuration steps:

1: Enter the configure terminal mode in the vro, and enter line vty 0 4. This command is used to control the number of access terminals from 0 to 5 ~ 4.

2: Set the password for the console port.

3: Set a privileged password.

4: telnet Ip_address

2. back up the configuration file running-configure and update IOS. (vro operating system)

1: copy running-config tftp:

2: Follow the prompts