What's the reason for connecting to a router that doesn't go online

When the router is connected, you find that you can't surf the internet, it must be a frustrating thing. Small make up here to say is, connect the router can not access the situation there are several, different situations have different reasons. The next step will be to analyze these situations slowly.

Failure condition 1: Can log in normally QQ, but cannot open the webpage.

Workaround: Manually set the computer's Internet card corresponding to the DNS server address in the TCP/IP address, and the DNS server address in the router settings. Mobile phone set up the Router management interface DNS server method: Login to the Router management interface, click "Network Parameters/wan parameters", under its manual settings, and some router settings under the "DHCP Service" option to set the DNS server address.

Fault condition: There are some computers in the local area that can surf the internet.

Solution: With a network cable will be bound MAC address of the computer and the router's LAN port, note that this time the router does not connect the modem connection, and then use the router's MAC address cloning function, the MAC address of the network card binding to the broadband router, the specific method see knowledge supplement; Finally, View and bind to a computer MAC address that is not bound. Click "Start/Run" and enter "Cmd/k Ipconfig/all", where "physical Address" is the MAC for this computer.

Failure reason: Cannot access the Internet through normal dialing.

Solution: Start IE browser, enter "192.168.0.1" in the Address bar, the system will be prompted to enter the login username and password, login into the router management interface, find "connection type", reset dial-up username and password can be.

There are three common scenarios and corresponding solutions for connecting routers that are not connected to the Internet.