Hard drive bad reason is many, and our daily illegal operation and use of a direct relationship, then what wrong operation will cause the hard drive appear bad way?
Hard drive bad road can be said to be a fatal failure of the hard drive, the hard drive bad road after the hard drive often represents the end of the hard disk life, because the hard drive in the bad way after not only some bad sector is not available, but also directly to the other available disk sector, so that the hard disk life will not be too long, Generally can not use for a long time will not be able to continue to use, resulting in the entire hard disk damage.
The emergence of large-capacity hard disk, so that the capacity of a single disc is also more and more large, so that a disc in the hard disk after the bad road will represent the greater the loss. In the case of a 160GB single disk drive, if a 160GB hard disk uses a single disc, it will damage the entire disc when the disc appears bad. A disk with two single disc capacity is at least one disc available. Therefore, in the use of large-capacity hard drives, we should pay attention to the hard drive maintenance and maintenance, to ensure that the hard disk life and data security.
Hard drive bad reason is many, and our daily illegal operation and use of a direct relationship, then what wrong operation will cause the hard drive appear bad way? Next I may wish to the most capacity of the hard drive appears bad way of several kinds of misoperation introduced to everyone, to arouse the attention of everyone.
1, Vibration
Hard drive manufacturing process is very complex, the process is very sophisticated, although the major hard disk manufacturers in the hard drive to join the earthquake-resistant function, but the collision and vibration is still trapped around the hard drive one of several major killers. Excessive collision and long-term work in the vibration of the environment is very easy to cause hard disk disc and head combination is not tight, the phenomenon of head fracture, especially in the hard work, the consequences will be even more serious. Therefore, be sure to keep the hard drive tightly fastened to the inside of the chassis and tighten each screw. In addition to the work process do not directly move the hard disk and mobile chassis, you need to move the computer to remember to take care of the light, to prevent hard disk collision caused damage.
2, dust
Dust on the hard disk damage is very large, it can be said that dust is the number one killer of the hard drive. We know that the hard disk's head and disc contact is very close, not allowed to have the slightest bit of dust, if the dust into the hard disk, then the consciousness of the hard drive away from damage for a long period.
In addition, if in the dust serious environment long-term work, hard disk is easy to attract dust particles in the air, so that its long-term accumulation in the hard drive of the internal circuit components, will affect the thermal distribution of electronic components, so that the temperature of the circuit components rise, resulting in leakage or burned components. Dust may also absorb moisture, corrosion of the internal electronic circuit, causing some inexplicable problems, so the dust volume is small, but the damage to the hard disk is absolutely not to be underestimated. Therefore, environmental hygiene must be maintained to reduce moisture and dust content in the air.