PetroChina Fushun Petrochemical Heavy oil catalytic unit has been discontinued

January 19 9:25 A.M., PetroChina Fushun Petrochemical Branch (hereinafter referred to Fushun petrochemical) Oil factory suddenly exploded and caused the fire. As of the "daily economic news" at the time of press, from Fushun Petrochemical learned that the latest situation shows that the fire has been controlled, Fushun petrochemical found that the cause of explosion is a heavy oil catalytic unit in the Stability unit of the flash explosion.　　According to the latest news, as at 19 o'clock 19th, the explosion killed 1 people, 2 people were missing, the explosion at the scene remains a residual flame.　　This is also since September 7 last year Fushun Petrochemical oil plant in the aromatic workshop of the fire explosion, Fushun Petrochemical appeared another accident. The explosion caused thousands of homes damaged on the morning of 19th, the explosion occurred after the fire has brought billowing smoke, the surrounding plant most of the sky cover. "Our factory has been sealed off and can't get in." "Our leaders have gone to the scene and are not back yet," said a source in the Fushun petrochemical propaganda department. "The accident caused the scene within a radius of the factory glass by explosion impact, the majority was shattered, and the surrounding Fushun Nian Pan Township, Zhang Dian Street, such as more than 1000 residential homes have been damaged, mainly the distortion of window frames, glass crushing. At present, the local relevant departments are helping the damaged residents, to raise a variety of glass, plastic sheeting and other materials to help residents repair the house overnight, to avoid freezing.　　According to the residents in the vicinity of the incident, at that time, from 200 meters away from the scene can be seen billowing black smoke, but also can smell the smell of burnt. After the accident, Fushun Local government immediately launched a contingency plan, more than 40 fire engines and hundreds of firefighters rushed to the scene to rescue, the explosion site cooling operations, no secondary accidents occurred at the scene. After the burning of the production materials in the catalytic unit is completed, the safety hazard can be completely excluded.　　The cause of the accident is under investigation.　　It has been reported that more than 30 injured personnel have been sent to hospital treatment, and according to the latest news, the accident has resulted in 1 deaths, 2 people missing.　　The heavy oil catalytic unit is now discontinued. It is worth mentioning that the accident is the third July 16 of the international oil and gas transportation pipeline in Dalian, after the explosion, PetroChina in Liaoning province occurred in the three explosion accident.　　As for the cause of the accident, Fushun Petrochemical Corporation is tentatively identified as: the stabilization unit of heavy oil catalytic unit has flash explosion accident. September 7 last year, Fushun Petrochemical Oil Three plant aromatic workshop had a fire explosion accident. "The reasons for these two accidents are not the same, last year was the workshop P-308 xylene Tower Bottom Pump In the operation of the seal suddenly leaked, the fire occurred."　　Fushun Petrochemical Propaganda department concerned Personage said. Flash explosion is when flammable gas in a space in the air is not circulating in a certain concentration, once encountered an open flame or spark will immediately burn explosion exploded.　　In general, a one-time explosion, if flammable gases can be supplemented in time may cause multiple explosions. According to the official said the explosion occurred in the heavy oil catalytic device is now discontinued. Fushun Petrochemical Oil Plant processing capacity of 5 million tons per year, the accident occurredBefore, the plant has been 1.5 million tons/year of heavy oil catalytic equipment, such as overhaul and renovation.