DHD's Internet access settings and MMS settings

I believe that many users who have just bought DHD do not know how to access the Internet, and many users fail to access the Internet after setting their own APN options, or cannot receive MMS while accessing the Internet. In fact, many of these problems are caused by the addition of the net, WAP, and mms apn options in other tutorials! Because DHD supports WCDMA, you can only use Unicom phone cards if you want to use 3G. back to the beginning, you only have to click the menu key and then select Settings, then select wireless and network in the settings, then select shift ** network settings in the wireless and network, and finally click the Access Point name. after entering, there is no default content in it. At this time, we click the menu key and then click the name of the new access point. Then we can enter it as follows.

1. Setting Method (MOVE ):

MMS settings

1. Name: China Mobile MMS settings
2. APN: cmwap
3. Proxy:
4. Port:
5. Username: (empty)
6. Password: (empty)
7. SERVER: (empty)
8. mmsc: mmsc.monternet.com
9. MMS Proxy: 010.000.000.172
10. MMS port: 80
11. MMS protocol: Select WAP 2.0.
12. Mc *** 460
13. mn *** 00
14. APN type: MMS

After editing, press menu and select "save"

Internet Settings:

1. Name: cmnet
2. APN: cmnet
3. Proxy:
4. Port:
5. Username: (empty)
6. Password: (empty)
7. SERVER: (empty)
8. mmsc:
9. MMS Proxy:
10. MMS Port:
11. MMS protocol: Select WAP 2.0.
12. Mc *** 460
13. mn *** 00
14. APN type: Default

After editing, press menu and select "save"

Ii. Setting Method (China Unicom 3G ):

1. Set Internet access

Menu-settings-wireless and network-shift ** network settings-Access Point name-New Access Point name:

Name: 3 GNET

Access Point name: 3 GNET

MMS protocol: WAP2.0

MCC: 460

MNC: 01

Access Point name type: default (manually entered, must be in lower case)

Do not fill in all others or follow the default status

Press menu-> Save

Click set as default

2. MMS settings

Menu-settings-wireless and network-shift ** network settings-Access Point name-New Access Point name:

Name: MMS

Access Point name: 3 gwap

Mmsc: http://mmsc.myuni.com.cn

MMS Proxy: 010.000.000.172

MMS port: 80

MMS protocol: WAP2.0

MCC: 460

MNC: 01

Access Point name type: MMS (must be in lower case)

Press menu-> Save

You do not need to set any other access points.

After all the settings are complete, you should be able to access the Internet and send and receive MMS normally. In areas without 3G signals, 2g (GSM) signals can also access the Internet and send and receive MMs, the difference caused by the network lies in the speed of the Internet.