Make a simple setup of the network first
1. Back to the desktop at the same time press "WIN" + "X" "senior management" and then we click "Command Prompt (Admin) (A)".
2. Now we are entering the "admin: Command Prompt" as shown in the picture, in fact, the CMD mode is the same as the XP system:
3. At the command prompt, enter "Netshwlan set hostednetwork mode=allow ssid= wireless name key= password", where the wireless name and password are "Samsung" and "12345678" for example, Users can set themselves (the user security key should be a string of 8 to 63 ASCII characters).
4. All right, we need to be careful. One letter must not be lost and then press "Enter":
5. Then I also need to enter "Netshwlan start Hostednetwork" to enable the hosting network.
6. Then press "enter" as shown in the following figure, there will be a hint "started hosting network" click to enter.
Step two, now set the network share
1. In the lower right corner of the computer desktop we click on "Wireless Icon"-"open Network and Sharing Center" into, as shown in the following figure.
2. Then we click on "Change adapter Settings" To enter the details as shown in the picture.
3. OK again we find "local connection *14", the following figure:
4. Use the right mouse button to click "Wi-Fi" and select "Properties".
5. In the Wi-Fi attribute, click "Share".
6. Select this as shown in the red box below.
7. We then click on "Local Connection *14" to enter, as shown in the following figure.
8. OK then click "OK" as soon as we select the following figure.
Well, if this configuration is still unable to connect then we can restart the computer to try to see if it can be solved oh, of course, there is a point your computer must have a wireless card to be able to oh, otherwise can not be set into WiFi hotspot Oh.