How to set up two built-in wireless local network cards for Internet sharing in Windows 7

The computer development speed can be said to be very fast, whether it is hardware or software. As the win7 system is fully listed, the operating system develops towards a more user-friendly operation interface, windows 7 inherits the advantages of Windows XP and Vista, while also absorbing the characteristics of Apple's Mac OS X system, the requirements for computer hardware, less than Vista, higher than XP; the Design of Windows 7 is mainly centered around five key points-a unique design for laptops, a design based on application services, User Personalization, audio-visual entertainment optimization, and a new engine for ease of use, it is practical, beautiful, fast, secure, and compatible, providing users with a better multimedia experience. The price of the notebook is also reduced, and now almost all the laptops on the market are pre-installed with windows7 systems and wireless LAN. So recently, many of my friends asked me how to enable two laptops to share the Internet with the built-in wireless LAN. Today, I will write down the steps for reference by a friend who needs them. I hope they will be helpful to you after reading my article.
1. Let's talk about my current network connection:

ADSL cat ----- vro -- current two (with wireless network card)
2 first, connect to the vro through the wired network card (local connection) of the notebook or directly connect to the cat.

3. Move the mouse to the network connection icon in the lower-right corner of the desktop, right-click it, and click Open Network and sharing center.

4. Select a local connection with the mouse. the dialog box is displayed.

5-point attribute

Select the sharing tab and check the box that allows other network users to connect to the computer over the Internet.

5. Then, return to the network and sharing center to select and manage the wireless network.

6. Select the attributes of the adapter.

On the network tab of the wireless network connection properties, select Internet Protocol Version 4 (TCP/IPv4)
Set to 192.168.3.1 subnet mask 255.255.255.0

7. Then return to the wireless management network to select and add

The dialog box for manually connecting to the wireless network is displayed. Select to create a temporary network (c)

Set wireless temporary network point next step

Set any security key of the network name security type

Click Next. When the Network is available, click Close.

At this time, you should be able to view the wireless network you just created by managing the wireless network.

At this time, we have completed the network settings for the host, and completed the settings for this notebook and another notebook.

In another notebook, we only need to open the management wireless network in the network and sharing center and select the adapter attribute to modify the IP address, that is, the first step mentioned above. However, the IP address should be after 192.168.3.xx. the XX can use any default gateway as the IP address 192.168.3.1 of the primary notebook. the DNS server may vary depending on the local telecommunications department. If you do not know, you can go to the local connection of the primary notebook (that is, the laptop connected to broadband) to view the details.

How to view DNS

After setting all the settings, click the Network icon in the lower-right corner of the screen to bring up the wireless network connection dialog box, then we will find that there is a waxpen wireless network we just created. Click the connection prompt, enter the password, and enter the password we set above so that we can complete the network settings, now another notebook can surf the Internet. If you have any questions, leave a message. In this way, multiple laptops can be connected to the Internet to transfer files.