How to view the Internet terminal's speed on the PU router

How to view the Internet terminal's speed on the router

If the router uses the process of slow speed of the phenomenon, you must be concerned about whether there are individual terminals to seize the speed. In the management interface of the router can see the speed of each terminal, so as to provide you with the basis for judging problems.

Use the Router administration address (tplogin.cn or 192.168.1.1) to log on to the admin interface in the browser.

The general router has three different interface styles, different interface to see the speed of the way there are differences, please combine your router interface reference:

Traditional interface

Login Router Management interface, click the System Tools >> traffic statistics, enable the flow statistics function, the interface can display the current connection to all terminals of the router real-time speed, the following figure:

Note: Some older versions of the router can only display statistics to the traffic, need to calculate the rate (display value refresh once change/refresh time = Average rate).

If you need to control the speed of your terminal, set it in IP bandwidth control.

New interface

Login Router Management interface, click on the main interface Device management >> connected device (or host device), you can view the current connection to all terminals of the router real-time speed, the following figure:

The new interface router supports a guest network, such as a guest network enabled, and the terminal connection connecting the guest signal needs to be viewed in connection device Management >> guest devices.

You can set the speed control directly on this page.

Cloud Routing

Login Router Management interface, click on the main interface Device Management >> Host network, you can view the current connection to all terminals of the router real-time speed, the following figure:

Cloud routing supports guest networks, such as the ability to enable guest networking, to connect the terminal network of guest signals to the device management >> guest devices.

You can click Manage to set speed control.