Illustration: Huawei ADSL setting easily realizes the dream of surfing the internet

Illustration: Huawei's ADSL settings can easily achieve the dream of surfing the Internet. You may have heard of Huawei's ADSL settings. The following describes the knowledge of Huawei's ADSL settings, how can we use Huawei's ADSL settings to make it easier? The following is a detailed introduction.

It is a pleasant task to enable a computer to access the Internet without dialing. Although we use the Huawei ADSL settings, there is a feeling of using a fixed IP address to access the Internet, the day before yesterday, I upgraded my Huawei ADSL set up Huawei's MT800 to the routing mode. The software version is V100R005C01B010SP01. This article is effective for the MT800 settings of this software version. I have not tried any other versions, I am not sure I can pass it. If you are interested, please join us.

 

Huawei ADSL settings

After the MT800 and network cables are normally connected through twisted pair wires, you need to change the TCP/IP settings of your network adapter. You can set the settings to: IP address 192.168.1.X, subnet mask: 255.255.255.0, Gateway: 192.168.1.1, DNS: 192.168.1.1. Click "OK" to save it. Open IE and enter "http: // 192.168.1.1" in the address bar. The logon dialog box is displayed. The default username and password of MT800 are admin.

After you log on, the MT800 management interface is displayed. The default Management Interface cannot find the Huawei ADSL configuration interface of PPPOE. Naturally, it cannot be directly set up by Huawei ADSL. There are many articles on the Internet that can be implemented by updating the software version, I have not tried it yet, because it is risky to do so. We recommend that you do not do that.

In fact, for the MT800 of V100R005C01B010SP01, the default software can be used to set routes, and the hardware also supports the routing mode. Specific steps: access http in the browser address: // 192.168.1.1/MainPage? Id = 14. Set the NAT option to "allowed ".

Enter http: // 192.168.1.1/MainPage in the address bar of the browser? Id = 16, in the Point-to-Point Protocol PPP) Huawei ADSL settings to add a PPP interface: PPP interface select ppp-0, login name password fill in your application for ADSL access when the user account password, pay attention to the case. Then submit.

Enter http: // 192.168.1.1/MainPage in the browser? Id = 3. It is very important to change the default user name and password! Access address: http: // 192.168.1.1/MainPage? Id = 4. Save your changes and restart MT800.