Bridging Mode settings pee:
1th Step
After Fedora is installed on the virtual machine, open the VM's menu bar, click Edit------Virtual Network editor, select the "Host Virtual network Mapping" tab, and then manually select the VMnet0 as your local physical network card (to select the network card you are using, for example, your computer has a wireless card, There is a wired network card; You are now using wireless networks, then bridge to the wireless card, if you are now using a wired network card, then bridge to the wired network card), do not choose automatic settings. then click OK.
2nd Step
Enter the virtual machine's operating system, open HyperTerminal, enter Ifconfig eth0, and check the Eth0 network settings.
It is important to determine whether the virtual machine and host are in the same network segment. If the host IP is 192.168.0.2, then the IP address of the virtual machine should be from 192.168.0.1 to 192.168.0.254.
The above are from the Internet to find information, but how to set up, and then the virtual machine in the IP Settings network management and DNS per host set success. So the red font is critical- then set the virtual machine's gateway to the host-filled gateway and DNS
Vmvare Bridging the Internet