Ao Mei Partition Assistant
1. Download and install software
2. After the installation is complete, open the software and open the Partition Assistant professional software, as shown in the figure:
3. Select OS migration as shown in the figure:
4. Click next;
5. Select the target disk, that is, the system disk we want to create. (remember that the solid state disk must be in the unformatted state before you can choose next. Otherwise, the next step is unavailable );
6. As shown in the figure: Select the Target Disk and select next;
7. Here we operate partitions. Because the selected disk is only 64 GB and the actual capacity is 59, the system is not partitioned separately;
8. If you want to move the partition, move the cursor and draw a circle to move the sphere to select the partition size;
9. Select next and click finish;
10. Click finish, as shown in the following figure:
11. Click submit as shown in the following figure:
12. After the execution is selected, select (yes) as shown in the following figure:
13. If "yes" is selected, the system will restart. After the restart, no manual operation is required. The software will automatically enter the relocation copy interface, as shown in the figure:
14. The system interface will be restarted later. Here we restart the system and enter the BIOS to set the solid state for the first startup to complete the system migration.
After all the above operations are completed, you can automatically enter the system interface. You will find that the system has been successfully migrated to the attached SSD, and the 4 K alignment has been completed by default.
