The Win7 system does not have Internet access to the "Modem not Found" reason and troubleshooting steps. nowadays many users install Win7 systems on their computers because the Win7 system is stable and secure. But in the use of the process will inevitably encounter a number of small problems, such as a user said after installing the Win7 system to find that the Internet can not be found, and always prompted to find a modem, even if the Win7 system can not be installed, this situation occurs? The following small series tells you how to solve the Win7 modem error.
1, the first need to check the power of each device and connectors have not been plugged in well;
2. Remote access Memo book files and current network and dial-up connections configurations may be inconsistent if you change your communication device, make sure that you reconfigure network and dial-up connections. If the error persists, you can delete and recreate network and dial-up connections;
3, Win7 error code 651, routing can not be tried on the dial: Open WINDOWSSYSTEM32LOGFILESWMI, double hit open WMI and then open the inside of the rtbackup will prompt you need administrator rights to continue to restart, you can repair;
4, no words to the WMI suffix for the ETL file deletion including rtbackup in the restart;
5. If none of the above is used, try it, disable the local connection-shutdown-check all the cat plugs pull down reseat-unplug the cat's power plug-wait 2 minutes before plugging in the plug-boot;
6, the last move first from other Internet-connected system of the machine copy the following file C:windowssystem32driversraspppoe.sys to replace the file in your computer;
7, in the local connection properties of an Internet Protocol version 4 (TCP/IPV4), use the following IP address inside input: 192.168.1.23, subnet mask: 255.255.255.0.
The above introduction is WIN7 system can not be prompted to "find a modem" reasons and solutions, in fact, as long as the cause of the fault to solve the problem.