26 common optimization performance methods in ASP. NET-copied

Source: Internet
Author: User
Tags add numbers

1. database access performance optimization

Database Connection and Shutdown

To access database resources, you need to create a connection, open a connection, and close the connection. These processes need to exchange information with the database multiple times for authentication, which consumes server resources. ASP. NET provides a connection pool to improve the impact of enabling and disabling databases on performance. The system places the user's database connection in the connection pool. If necessary, the connection is taken out. When the connection is closed, the connection is withdrawn and the next connection request is waited. The size of the connection pool is limited. If you still need to create a connection after the connection pool reaches the maximum limit, the performance will be greatly affected. Therefore, after a database connection is established, the connection is enabled only when operations are required. The connection is closed immediately after use, so as to minimize the time for opening the database connection and avoid exceeding the connection limit.

Use stored procedures

Stored procedures are a set of pre-compiled SQL statements stored on the server, similar to the batch processing files in the DOS system. Stored Procedures provide the ability to access databases immediately and process information quickly. The stored procedure can avoid multiple compilation of commands. After a command is executed, the execution plan will reside in the cache. You only need to directly call the binary in the cache when necessary.CodeYou can. In addition, the stored procedure runs on the server and is independent of ASP. NET.ProgramTo facilitate modification, the most important thing is that it can reduce the transmission of database operation statements in the network.

Optimize Query statements

In ASP. NET, the ADO connection consumes a considerable amount of resources. The longer the SQL statement runs, the longer the system resources are occupied. Therefore, try to use optimized SQL statements to reduce execution time. For example, a query statement that does not contain a subquery statement makes full use of indexes.

2. Optimized string operation performance

Use the tostring method of the Value Type

When connecting strings, you often use the "+" sign to directly add numbers to strings. This method is simple and can get the correct results. However, because different data types are involved, the numbers must be converted to the reference type through the boxing operation before they can be added to the string. However, the packing operation has a great impact on the performance, because during such processing, a new object will be allocated in the managed heap, and the original value will be copied to the newly created object. The Value Type tostring method can be used to avoid packing and improve application performance.

Use stringbuilder class

The string class object cannot be changed. In essence, the re-assignment of the string object re-creates a String object and assigns the new value to the object, the tostring method does not significantly improve the performance. When processing strings, it is best to use the stringbuilder class. Its. Net namespace is system. Text. This class does not create a new object, but directly performs operations on strings through append, remove, insert, and other methods, and returns the operation results through the tostring method. Its definition and operation statement are as follows:

Int num; system. text. stringbuilder STR = new system. text. stringbuilder (); // create a string Str. append (Num. tostring (); // Add the numeric value num response. write (Str. tostring); // display the operation result 3. optimize configuration files for Web server computers and specific applications to meet your specific needs

By default, ASP. NET configuration is set to enable the widest range of features and adapt to the most common solutions. Therefore, application developers can optimize and modify some of the configurations based on the features used by the application to improve application performance. The following lists some options you should consider.

Only enable authentication for the desired application.

By default, the authentication mode is windows, or NTLM is integrated. In most cases, it is best to disable authentication in the machine. config file and enable authentication in the web. config file for applications that require authentication. Configure the application based on the appropriate request and response encoding settings. ASP. NET default encoding format is UTF-8. If your application is strictly ASCII, configure the application to use ASCII for a slight performance improvement.

Disable autoeventwireup for applications.

In the machine. config file, set the autoeventwireup attribute to false, which means that the page does not match the method name with the event or hook the two (for example, page_load ). If page developers want to use these events, they need to override these methods in the base class (for example, they need to rewrite page. onload for page loading events, rather than using the page_load method ). If autoeventwireup is disabled, the page will be slightly improved by leaving the event connection to the page author rather than automatically executing it.

Remove unused modules from the request processing pipeline.

By default, all functions of nodes in the machine. config file of the server computer are retained to active. Based on the features used by the application, you can remove unused modules from the request pipeline for a slight performance improvement. Check each module and its functions and customize it as needed. For example, if you do not use session Status and output cache in an application, you can remove them from the list so that requests do not perform other meaningful processing, you do not have to execute the code for entering and leaving each module.

4. Disable the debugging mode.

Remember to Disable debug mode before deploying production applications or performing any performance measurements. If the debug mode is enabled, the performance of the application may be greatly affected.

5. For applications that rely heavily on external resources, consider enabling network gardening on a multi-processor computer.

ASP. net Process Model helps enable scalability on a multi-processor computer, distribute work to multiple processes (one CPU per worker), and each process sets the processor relationship to its CPU. This technology is called Web gardening. Enable Web gardening for your application if your application uses a slow database server or calls a COM Object with external dependencies (only two possibilities are mentioned here. However, before deciding to enable Web gardening, you should test how applications are executed in the Web garden.

6. cache data and page output whenever possible

ASP. NET provides some simple mechanisms to cache the output or data of these pages when you do not need to request dynamic computing page output or data for each page. In addition, by designing pages and data requests to be cached (especially in areas where the site is expected to have a large amount of communication), you can optimize the performance of these pages. Compared with any web form function of. NET Framework, using the cache appropriately can improve the performance of the website. Sometimes this increase is more than an order of magnitude. There are two points to note when using the ASP. NET cache mechanism. First, do not cache too many items. Each item in the cache has an overhead, especially for memory usage. Do not cache items that are easy to recalculate and rarely used. Second, the period of validity allocated to cached items should not be too short. Items that expire soon will result in unnecessary turnover in the cache, and often lead to more code cleanup and garbage collection work. If you are concerned about this issue, monitor the cache total turnover rate performance counters associated with ASP. NET applications performance objects. High turnover rate may indicate problems, especially when items are removed before expiration. This is also called memory pressure.

7. Select a data view mechanism suitable for pages or applications

There are often important trade-offs between convenience and performance based on how you choose to display data on a web form page. For example, the DataGrid web server control may be a convenient and quick way to display data, but its overhead is often the largest in terms of performance. In some simple cases, it may be very effective to generate an appropriate HTML to present your own data, but custom and browser targeting will quickly offset the extra benefits you get. The repeater Web Server Control is a compromise between convenience and performance. It is efficient, customizable, and programmable.

8. Use the sqldatareader class for fast data-only cursor

The sqldatareader class provides a method for reading data streams only retrieved from the SQL Server database. If you are allowed to use an ASP. NET application when creating it, The sqldatareader class provides higher performance than the dataset class. This is because sqldatareader uses the Local Network Data Transmission Format of SQL Server to directly read data from the database connection. In addition, the sqldatareader class implements the ienumerable interface, which allows you to bind data to server controls. For more information, see sqldatareader class. For information about how ASP. NET accesses data, see access data through ASP. NET.

9. Use SQL Server Stored Procedures for data access

Among all data access methods provided by. NET Framework, SQL Server-based data access is a recommended choice for generating high-performance, scalable Web applications. When using a hosted SQL Server Provider, you can use compiled stored procedures instead of special queries to obtain additional performance improvements.

10. Avoid single-threaded unit (STA) COM components

By default, ASP. NET does not allow any Stas COM component to run on the page. To run them, you must include the aspcompat = true attribute in the. aspx file in the @ page command. In this way, the thread pool used for execution is switched to the sta thread pool, and httpcontext and other built-in objects can be used for COM objects. The former is also a kind of performance optimization, because it avoids any call to mail multi-threaded units (MTA) to the sta thread. Using the sta COM component may greatly damage the performance and should be avoided as much as possible. If you must use the sta COM component, such as in any InterOP scheme, you should make a large number of calls during execution and send as much information as possible during each call. Also, be careful not to create any sta COM components during page construction. For example, in the following code, the mystacomponent created by a thread will be instantiated during page construction, and this thread will not run the sta thread of the page. This may have a negative impact on performance, because to construct a page, you must complete the sending and receiving process between the MTA and the sta thread.

Dim mycomp as new mystacomponent () Public sub page_load () mycomp. Name = "Bob" End sub

The preferred mechanism is to postpone object creation until the above code is executed in the sta thread in the future, as shown in the following example.

 

Dim mycomp public sub page_load () mycomp = new mystacomponent () mycomp. Name = "Bob" End sub

We recommend that you construct any COM components and external resources as needed or in the page_load method. Never store any Stas COM component in shared resources that can be accessed by other threads other than the threads that construct it. Such resources include resources such as cache and session status. Even if the sta thread calls the sta COM component, only the thread that constructs the sta COM component can actually serve the call, which requires sending and processing calls to the Creator thread. This mail may cause significant performance loss and scalability problems. In this case, consider the possibility of making the COM component an mta com component, or migrate code to make the object a hosted object.

11. migrate call-intensive COM components to managed code

. NET Framework provides a simple way to interact with traditional COM components. The advantage is that the new platform can be used while the existing investment is retained. However, in some cases, retaining the performance overhead of the old component makes it worthwhile to migrate the component to the managed code. Every situation is different. The best way to determine whether to migrate components is to measure the Running Performance of web sites. We recommend that you study how to migrate any COM component that requires a large number of calls for interaction to managed code. In many cases, it is impossible to migrate legacy components to managed code, especially when a web application is initially migrated. In this case, one of the biggest performance barriers is to mail data from an unmanaged environment to a hosted environment. Therefore, in interactive operations, perform as many tasks as possible at any end, and then make a large call instead of a series of small calls. For example, all strings in the Common Language Runtime Library are Unicode, so all strings in the component should be converted to unicode format before calling managed code. In addition, after processing any COM objects or local resources, release them. In this way, other requests can use them and minimize the performance problems caused by later requests to the garbage collector to release them.

12. Use early binding in Visual Basic. Net or JScript. Code

In the past, one of the reasons why developers like to use Visual Basic, VBScript, and JScript is the so-called "non-type" nature. Variables do not need explicit type declarations and can be created simply by using them. When the data is allocated from one type to another, the conversion is automatically executed. However, this convenience will greatly damage the performance of the application. Visual Basic now supports type-safe programming by using the option strict compiler command. For backward compatibility, ASP. NET does not enable this option by default. However, to achieve optimal performance, we strongly recommend that you enable this option on the page. To enable option strict, include the strict attribute in the @ page command, or include this attribute in the @ control command for user controls. The following example shows how to set this attribute and calls four variables to show how this attribute causes a compiler error.

JScript.. Net also supports non-type programming, but it does not provide compiler commands that force early binding. If any of the following conditions occurs, the variable is bound in the late stage: it is explicitly declared as an object and is a field of the class without type declaration, is a special function or method member without explicit type declaration, and cannot deduce the type from its use. The last difference is complicated, because if the JScript.. Net compiler can deduce the type based on the usage of the variable, it will be optimized. In the following example, variable A is bound early, but variable B is bound late.

VaR A; var B; A = "hello"; B = "world"; B = 0; to achieve optimal performance, when declaring JScript .. net variable, assign a type to it. For example, var a: string.

13. Make all modules in the request pipeline as efficient as possible

All modules in the request pipeline have the opportunity to be run in each request. Therefore, it is critical to quickly trigger code when a request enters and leaves the module, especially in the code path that does not use the module function. The throughput test is executed when modules and configuration files are used and not used separately, which is very useful for determining the execution speed of these methods.

14. Use httpserverutility. Transfer to redirect between pages of the same application

Use the server. transfer syntax to avoid unnecessary client redirection by using this method on the page.

15. Adjust the number of threads for each auxiliary process of the application if necessary

The request structure of ASP. net tries to strike a balance between the number of threads executing the request and the available resources. An application that uses sufficient CPU power is known. This structure determines the number of requests that can be executed simultaneously based on the CPU power available for requests. This technology is called thread-control. But under some conditionsAlgorithmNot very effective. By using the pipeline instance count performance counter associated with the performance object of ASP. NET applications, You can monitor thread-control in perfmon. When a page calls external resources, such as database access or XML Web Services requests, the page requests usually stop and release the CPU. If a request is waiting for processing and a thread in the thread pool is free, the waiting request will start to be processed. Unfortunately, sometimes this may lead to a large number of concurrent requests and many waiting threads on the Web server, which have adverse effects on server performance. Generally, if the gate factor is the response time of external resources, too many requests are waiting for resources, which is not helpful for the Web server throughput. To alleviate this problem, you can manually set the number of threads in the process by changing the maxworkerthreads and maxiothreads attributes of the machine. config configuration file node.

Note: The auxiliary thread is used to process ASP. NET requests, while the IO thread is used to provide services for data from files, databases, or XML Web Services. The value assigned to these attributes is the maximum number of threads in each CPU type in the process. For dual-processor computers, the maximum number is twice the set value. For a four-processor computer, the maximum value is four times the set value. In any case, it is best to change the default value for computers with four or eight CPUs. The default value can be used for computers with one or two processors. However, for computers with more processors, one hundred or two hundred threads in a process may cause more disadvantages. Note that too many threads in the process will often reduce the server speed, because the operating system will spend the CPU cycle on the maintenance thread rather than processing the request due to extra context switching.

16. Use the Garbage Collector and Automatic Memory Management of the Common Language Runtime Library as appropriate

Be careful not to allocate too much memory to each request, because the Garbage Collector must do more work more frequently. In addition, do not point unnecessary pointers to objects because they will keep objects active and avoid objects containing the Finalize method as much as possible, because they will lead to more work in the future. In particular, do not release resources in finalize calls, because resources may always consume memory before they are recycled by the garbage collector. At last, this problem often causes a devastating impact on the performance of the Web server environment, because it is easy to exhaust a specific resource while waiting for finalize to run.

17. If there is a large web application, consider executing pre-Batch compilation.

Each time a first request to a directory is sent, a batch compilation is performed. If pages in the directory are not analyzed and compiled, this function analyzes and compiles all pages in the directory in batches to make better use of disks and memory. If this takes a long time, a single page is quickly analyzed and compiled so that the request can be processed. This feature brings ASP. NET performance benefits because it compiles many pages into a single assembly. Accessing a page from a loaded assembly is faster than loading a new assembly on each page. The disadvantage of batch compilation is that if the server receives many requests for pages that have not yet been compiled, the performance may be poor when the web server analyzes and compiles them. To solve this problem, you can execute pre-Batch compilation. Therefore, you only need to request a page from the application before it is activated, regardless of the page. Then, when the user visits your site for the first time, the page and its assembly will have been compiled. There is no simple mechanism to know when batch compilation will take place. Wait until the CPU is idle or no more compiler processes (such as csc.exe (C # compiler) or vbc.exe (Visual Basic compiler) Start. Avoid changing the assembly in the \ bin directory of the application. Changing the page will cause re-analysis and compilation of the page, and replacing the assembly in the \ bin directory will cause full re-Compilation of the directory. On a large site that contains many pages, a better way is to design different directory structures based on the frequency of page replacement or Assembly planned. Pages that do not often change can be stored in the same directory and pre-compiled at a specific time. Frequently changed pages should be in their own directories (each directory can contain hundreds of pages at most) for quick compilation. Web applications can contain many subdirectories. Batch compilation occurs at the directory level, not the application level.

18. Do not rely on exceptions in the code

Exceptions greatly reduce performance, so you should not use them as a way to control normal program processes. If the code may cause exceptions, perform this operation. Do not capture exceptions before processing the status. Common solutions include checking null, assigning a value to a string that is analyzed as a numeric value, or checking a specific value before applying a mathematical operation. The following example shows the code that may cause exceptions and test whether code in a certain status exists. The two generate the same results.

Try {result = 100/num;} catch (exception e) {result = 0;} //... to this. If (num! = 0) Result = 100/num; else result = 0;

19. Use httpresponse. Write to concatenate strings

This method provides very effective buffering and connection services. However, if you are executing extensive connections, use multiple response. Write calls. The technology shown in the following example is faster than the connection string using a single call to the response. Write method.

 

Response. write ("A"); response. write (mystring); response. write ("B"); response. write (myobj. tostring (); response. write ("C"); response. write (mystring2); response. write ("D ");

 

20. Keep the buffer closed for special reasons.

Disabling web form page buffering can cause a large amount of performance overhead.

 

21. Only save the Server Control view status when necessary

Automatic view status management is a function of the server control. This function enables the Server Control to re-fill their attribute values during the round-trip process (you do not need to write any code ). However, because the view status of the server control is redirected to and from the server in the hidden form field, this function does have an impact on performance. You should know under which circumstances the view status will be helpful and under which circumstances it will affect the page performance. For example, if you bind a server control to data during each round-trip process, the new value obtained from the data binding operation replaces the saved view status. In this case, disabling the view status can save processing time. By default, view status is enabled for all server controls. To disable view status, set the enableviewstate attribute of the control to false, as shown in the following DataGrid Server Control example.

 

You can also use the @ page command to disable the view status of the entire page. This is useful when you do not send the page back to the server:

 

Note: The @ control command also supports the enableviewstate attribute, which allows you to control whether the view State is enabled for the user control. To analyze the number of view States used by the server control on the page, please (include the trace = "true" attribute in the @ page command) enable tracing on this page and view the viewstate column of the control hierarchy table. For more information about tracing and how to enable it, see ASP. NET tracing.

22. Avoid unnecessary round-trip to the server

Although you may want to use the time-saving and code-saving functions of the web forms page framework as much as possible, ASP. NET Server controls and sending back events cannot be used in some cases. Generally, you only need to start the round-trip process to the server when retrieving or storing data. Most data operations can be performed on clients during the round-trip process. For example, it is often possible to verify user input from an HTML form on the client before the data is submitted to the server. Generally, if you do not need to pass the information to the server to store it in the database, you should not write the code that leads to the round-trip process. If you develop custom server controls, consider making them present client code for browsers that support ecmascript. By using the server control in this way, you can significantly reduce the number of times information is not necessary to be sent to the web server.

Use Page. ispostback to avoid unnecessary operations on the round-trip Process

If you write the code for processing the Server Control sending and processing, you may sometimes need to execute other code on the first request page, instead of the Code executed when the user sends an HTML form contained in the page. Whether the page is generated in response to the server control event.

Use the page. ispostback attribute to execute code conditionally

For example, the following code demonstrates how to create a database connection and command. This command binds data to the DataGrid server control when you request this page for the first time.

Void page_load (Object sender, eventargs e) {// set up a connection and command here. If (! Page. ispostback) {string query = "select * from authors where firstname like '% Justin %'"; mycommand. fill (DS, "Authors"); mydatagrid. databind ();}}

Because the page_load event is executed during each request, the code above checks whether the ispostback attribute is set to false. If yes, the code is executed. If this attribute is set to true, no code is executed. Note that if you do not run this check, the page sending behavior will not be changed. The code of the page_load event is executed before the Server Control event is executed, but only the results of the server control event can be displayed on the output page. If you do not run this check, the page_load event and any server control event on the page will still be processed.

23. Disable it when the session status is not used

Not all applications or pages need to be specific to the user's session status. You should disable the session status for any applications or pages that do not need the session status. To disable the page session Status, set the enablesessionstate attribute in the @ page command to false. For example:

 

Note: If the page needs to access session variables without creating or modifying them, set the enablesessionstate attribute in the @ page command to readonly. You can also disable the session Status of the XML Web Services method. For more information, see XML Web Services created using ASP. NET and XML Web Services clients. To disable the session Status of an application, set the mode attribute to off in the sessionstate configuration section of the Application Web. config file. For example:

 

24. Carefully select the session Status provider

ASP. NET provides three different methods for storing application session data: in-process session Status, out-of-process session status as a Windows service, and out-of-process session Status in the SQL Server database. Each method has its own advantages, but the in-process session status is the fastest solution so far. If you only store a small amount of data that is prone to loss in the session state, we recommend that you use in-process providers. Out-of-process solutions are mainly used to scale applications across multiple processors or computers, or to prevent data loss during server or process restart. For more information, see ASP. NET status management.

25. Unnecessary Server Control

In Asp.net, a large number of server-side controls facilitate program development, but may also lead to performance loss, because each time a user operates a server-side control, a round-trip process with the server is generated. Therefore, server control should be used less unless necessary.

26. ASP. NET application performance test

Before performing a performance test on ASP. NET applications, ensure that the application is correctly functioning and has no errors. You can use the following tools to test the performance: Web application strees tool (was) is a free test tool released by Microsoft. It can be downloaded from http://webtool.rte.microsoft.com. It can simulate hundreds of thousands of users simultaneously to access web applications, form a traffic load on the server, so as to achieve the purpose of testing, can generate average ttfb, average TTLB and other performance summary reports. Application Center Test (ACT) is a testing tool that is attached to the Enterprise Edition of Visual Studio. NET and is a Web application testing tool officially supported by Microsoft. It can intuitively generate chart results with more functions than was, but does not have the ability to be tested simultaneously by multiple clients. The "performance" counter in the "Administrative Tools" of the server operating system can monitor the server to understand the application performance.

Conclusion:

For website developers, compile ASP. net Applications, develop good habits, improve application performance, at least can delay the necessary hardware upgrade, reduce the cost of the website.

 

Note by baoer: not tested, but most of them have also been tested.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.