Accessing Windows sharing with MacOS installed in Xcode

Xcode InstallationOfMacOSAccessWindowsSharing is what we will introduce in this article. In the past two days, a virtual machine has been installedMacOSAlthough it takes a while because my CPU does not support virtualization, the installation was successful, using "[Apple system. snow Leopard 10.6.3. east Emperor v2.2 simplified English integrated version]. iAntares.10.6.3.v2.2.

CompleteMacOSAfter installation,XcodeInstallation is required,XcodeIs downloaded in my host system Windows 7, 64-bit), only throughWindowsShare to allow MacOS access for installation. In fact, it is relatively simple for MacOS to access Windows sharing:

1) GuaranteeMacOSThe same workgroup as Windows.

I will not talk about setting a working group for Windows. Everyone knows this. ^_^). Here we will talk about the steps for setting a working group for MacOS:

Click "Finder" ---> "service" ---> "service preference settings" to display the following interface:

If the display is not as shown in, click the "show all" button on the actual interface to display the above interface.

Click the "network" icon in the middle, click the "advanced" button in the window that comes out, and then click the "WINS" tab in the window that comes out, as shown in:

You only need to confirm that the "workgroup" name is consistent with that of the Windows system workgroup.

2) settingsMacOSAndWindowsThe system IP address is in the same CIDR block.

In Windows, the IP address settings of the MacOS system are not mentioned much.

In the network form), click the "TCP/IP" tab, and then select "Manual" in the "Configure IPv4" option, enter the IP address and mask of the same network segment as Windows in sequence.

3) set Windows Shared Folder

This is not much to say.

4)MacOSAccessWindowsShared Folder

Click "Finder" ---> "go" ---> "connect to server" menu to display the following form:

For example, the server address format is "smb: // xxx. xxx", where xxx. xxx is the address of the Windows system. After entering the server address, you can click the "+" button on the Right To save the server address for direct access next time) and click the "Connect" button below to connect to the Windows Shared Folder, enter the user name and password of the shared folder in the authentication box to display the Windows Shared Folder content.

To be honest, the point is that the two systems need to set the same workgroup name.

Summary:Xcode InstallationOfMacOSAccessWindowsI hope this article will help you with the shared content!