Due to server-side security factors, more network administrators prefer to build a streaming media server system (800Li Media Server) under the Linux operating system for real-time live and on-demand internet. So how to install and configure the streaming media server system under the Linux operating system? The following is a detailed installation configuration description. (For example, installation and configuration of Linux in a 800-stream Media server system)
Please confirm before installing
A. Administrator account privileges login;
B. Close the firewall;
C. Set the fixed IP. Set to auto Get IP will cause the streaming media server system to not work properly;
D. Confirm that the operating system is CentOS or Redhat.
The installation method is as follows:
1. Unzip the 800 stream Media Live system 800limediaserver-3.0-setup.tar.gz to any directory not/usr/local
2. Open the terminal and switch the directory to your unzip directory inside the terminal. (and switch to the folder where the install file is located)
3. Terminal inside input./install
4. Set the appropriate parameters according to the installation prompts:
The following were:
Set the IP address or domain name of this computer (this server)
Setting up a background Web Management Server port
Setting up an HTTP streaming server port
Set up RTMP server ports
Set RTMFP server Port awrthe
Setting up the background Web Management database port
Set up internal server program communication ports
Set the administrator password for the Web management system
Repeat
Set the Super Administrator password for the Web management system
Repeat
Make sure that the ports you have set are all available and added to the firewall Allow list
5. After the setting is complete, configure the server to run the parameters and start the service
6. Open and access the IP address of http://native via the browser-Web Management Server port such as:http://192.168.1.160:8085
Attached examples:
A. Unzip the Linux system. (To extract the installation package to the desktop for example)
B. Open the terminal
C. Enter the CD desktop and return
D. Enter CD 800limediaserver-3.0 and then enter
E. Enter ./install and enter
Wait for the system account to be created, then configure the system, by default, confirm, click Enter directly.
F. Set up administrator and Super password. Input time, the screen will not display, after the completion of input, directly click Enter.
G. After the software installation, the Software installation directory is/user/local/800li-media-server
H. Open remote management such as http://192.168.1.77:8085.
Build and configure a streaming server system that supports 2000 of people watching at the same time (detailed Linux steps)