C ++ stack, stack, free storage area, global/static storage area, and constant Storage Area

 

In C ++, memory is divided into five areas: heap, stack, free storage, global/static storage, and constant storage.
Stack is the storage area for variables that are automatically allocated by the compiler when necessary and clear when not needed. The variables are usually local variables and function parameters.
Heap is the memory blocks allocated by new. Their release compilers are not controlled and controlled by our applications. Generally, a new compiler corresponds to a Delete. If the programmer does not release the program, the operating system will automatically recycle it after the program is completed.
The free storage zone is the memory blocks allocated by malloc and so on. It is very similar to the heap, but it uses free to end its own life.
In the global/static storage area, global variables and static variables are allocated to the same memory. In the previous C language, global variables were divided into initialized and uninitialized ones, in C ++, there is no such distinction. They share the same memory zone.
Constant storage area, which is a special storage area. It stores constants and cannot be modified (of course, you can modify them by improper means, and there are many methods)
Clearly differentiate stack and stack
This is written by a senior. It is very detailed.
// Main. cpp
Int A = 0; global initialization Zone
Char * P1; uninitialized globally
Main ()
{
Int B; stack
Char s [] = "ABC"; stack
Char * P2; stack
Char * P3 = "123456"; 123456 is in the constant zone, and P3 is on the stack.
Static int C = 0; Global (static) initialization Zone
P1 = (char *) malloc (10 );
P2 = (char *) malloc (20 );
The allocated 10-byte and 20-byte areas are in the heap area.
Strcpy (P1, "123456"); 123456 is placed in the constant area, and the compiler may optimize it to the "123456" that P3 points.
}

Stored in heap and stack
When the stack is enabled for the called function, the related non-static variables or pointer memory in the function is enlarged, and the memory space allocated by malloc is placed in the heap area, however, the pointer returned after malloc allocation is in the stack zone.
Ii. Theoretical knowledge of heap and stack
2.1 Application Method
STACK:
Automatically assigned by the system. For example, declare a local variable int B in the function; the system automatically opens up space for B in the stack.
Heap:
The programmer needs to apply and specify the size. In C, the malloc Function
For example, P1 = (char *) malloc (10 );
Use the new operator in C ++
For example, P2 = (char *) malloc (10 );
But note that P1 and P2 are in the stack.

On the BBS, the distinction between heap and stack seems to be an eternal topic. It can be seen that beginners are often confused about this, so I decided to take him first.
First, let's take an example:
Void F () {int * P = new int [5];}
This short sentence contains the heap and stack. When we see new, we should first think that we allocated a heap memory. What about the pointer P? It allocates a stack memory, so this sentence means that the stack memory stores a pointer P pointing to a heap memory. The program will first determine the size of memory allocated in the heap, then call operator new to allocate the memory, then return the first address of the memory, and put it into the stack, the assembly code in vc6 is as follows:
00401028 push 14 h
0040102a call operator new (00401060)
0040102f add ESP, 4
00401032 mov dword ptr [ebp-8], eax
00401035 mov eax, dword ptr [ebp-8]
00401038 mov dword ptr [ebp-4], eax
Here, we have not released the memory for simplicity, So how should we release it? Is it delete p? Australia, the error should be "Delete [] P" to tell the compiler: I deleted an array and vc6 will release the memory based on the cookie information.
Well, let's go back to our topic: What is the difference between stack and stack?
The main differences are as follows:
1. Different management methods;
2. Different space sizes;
3. Whether fragments can be generated is different;
4. Different Growth directions;
5. Different allocation methods;
6. Different Allocation Efficiency;
Management Method: For stacks, it is automatically managed by the compiler without manual control. For heaps, the release work is controlled by programmers and memory leak is easily generated.
Space size: Generally, in a 32-bit system, the heap memory can reach 4 GB. From this perspective, there is almost no limit on the heap memory. But for the stack, there is usually a certain amount of space. For example, under vc6, the default stack space is 1 MB (as if so, I cannot remember ). Of course, we can modify:
Open the project and choose Project> setting> link, select output from category, and set the maximum value and commit of the stack in reserve.
Note: The minimum reserve value is 4 byte. Commit is retained in the page file of the virtual memory. Compared with the general setting, commit makes the stack open up a large value, memory overhead and startup time may be increased.
Fragmentation problem: for the heap, frequent New/delete operations will inevitably lead to memory space disconnections, resulting in a large number of fragments, reducing program efficiency. For the stack, this problem will not exist, because the stack is an advanced and outgoing queue. They are so one-to-one correspondence that it is impossible to have a memory block popped up from the middle of the stack, before the pop-up, the post-stack content has been popped up. For details, refer to the data structure. We will not discuss it one by one here.
Growth direction: For the stack, the growth direction is upward, that is, the direction to the memory address increase; For the stack, the growth direction is downward, is to increase towards memory address reduction.
Allocation Method: The heap is dynamically allocated without static allocation. There are two stack allocation methods: static allocation and dynamic allocation. Static allocation is completed by the compiler, such as local variable allocation. Dynamic Allocation is implemented by the alloca function, but the stack dynamic allocation is different from the heap dynamic allocation. Its Dynamic Allocation is released by the compiler without manual implementation.
Allocation Efficiency: the stack is the data structure provided by the machine system, and the computer will provide support for the stack at the underlying layer: allocate a dedicated register to store the stack address, the output stack of the Pressure Stack has dedicated Command Execution, which determines the high efficiency of the stack. The heap is provided by the C/C ++ function library, and its mechanism is very complicated. For example, to allocate a piece of memory, library functions search for available space in heap memory based on certain algorithms (for specific algorithms, refer to data structures/operating systems, if there is not enough space (probably because there are too many memory fragments), it is possible to call the system function to increase the memory space of the program data segment, so that there is a chance to allocate enough memory, then return. Obviously, the heap efficiency is much lower than the stack efficiency.
From this point, we can see that compared with the stack, the use of a large number of new/delete operations may easily cause a large amount of memory fragments; because of the absence of dedicated system support, the efficiency is very low; because it may lead to switching between the user State and the core state, the memory application will become more expensive. Therefore, stacks are the most widely used in applications. Even function calls are completed using stacks. The parameters and return addresses in the function call process are as follows, both EBP and local variables are stored in stacks. Therefore, we recommend that you use stacks instead of stacks.
Although the stack has so many advantages, but because it is not so flexible as the heap, sometimes it is better to allocate a large amount of memory space.
Whether it is a heap or a stack, it is necessary to prevent cross-border phenomena (unless you intentionally cross-border it), because the cross-border result is either a program crash, either it is to destroy the heap and stack structure of the program and generate unexpected results. It is considered that the above problems did not occur during your program running. You should be careful, maybe it will collapse at some time. At that time, debugging was quite difficult :)
By the way, there is another thing. If someone puts the stack together, it means stack, not heap, huh, huh, clear?
Static is used to control the storage and visibility of variables.
When a variable defined in a function is executed to its definition, the compiler allocates space for it on the stack, the space allocated by the function on the stack is released at the end of the function execution. This creates a problem: If you want to save the value of this variable in the function to the next call, how to implement it? The easiest way to think of is to define a global variable, but defining a global variable has many disadvantages, the most obvious drawback is that the access range of the variable is broken (so that the variables defined in this function are not controlled by this function ).
A Data Object is required to serve the entire class rather than a specific object, and the encapsulation of the class is not damaged. That is, the member is required to be hidden inside the class and invisible to the outside world.

Static internal mechanism:
Static data members must exist at the beginning of the program. Because the function is called during the running of the program, static data members cannot allocate space and initialize it in any function.
In this way, there are three possibilities for its space allocation. One is the header file of the class's external interface, where there is a class declaration; the other is the internal implementation of the class definition, there is a member function definition for the class, and the third is the global data description and definition before the main () function of the application.
Static data members must actually allocate space, so they cannot be defined in the class declaration (only data members can be declared ). The class declaration only declares the "size and specification" of a class and does not actually allocate memory. Therefore, it is wrong to write a definition in the class declaration. It cannot be an external definition of the class declaration in the header file, because it will duplicate the definition in multiple source files that use the class.
Static is introduced to inform the compiler that the variables are stored in the static storage area of the program rather than the stack space.
Data members are initialized sequentially according to the sequence in which they appear. Note that when static members are nested, ensure that the nested members have already been initialized. The order of cancellation is the reverse order of initialization.

Static advantages:
Memory can be saved because it is public to all objects. Therefore, for multiple objects, static data members only store one object for sharing. The value of a static data member is the same for each object, but its value can be updated. You only need to update the value of the static data member once to ensure that all objects have the same value after the update, which improves the time efficiency.

When referencing static data members, use the following format:
<Class name >:: <static member name>
If the access permission of the static data member is allowed (that is, the Public Member), in the program, according to the above format
To reference static data members.

PS:
(1) The static member function of the class belongs to the entire class rather than the class object, so it does not have the this pointer, which leads
It only supports the static data and static member functions of the category.
(2) static member functions cannot be defined as virtual functions.
(3) Since static members are declared in the class and operated outside of the class, it is somewhat special to perform the address fetch operation on them.
The variable address is a pointer to its data type, and the function address type is a "nonmember function pointer ".

(4) because the static member function does not have the this pointer, it is almost equivalent to the nonmember function.
This creates an unexpected benefit: Being a callback function allows us to combine C ++ and C-based X W
The indow system is combined and successfully applied to the thread functions.
(5) Static does not increase the space-time overhead of the program. On the contrary, it shortens the access of the subclass to the static members of the parent class.
Time, saving sub-class memory space.
(6) Add the keyword "static" before <definition or description> to the static data member.
(7) static data members are stored statically, so they must be initialized.
(8) static member Initialization is different from general data member initialization:
Initialization is performed in the external class without static before, so as to avoid confusion with general static variables or objects;
During initialization, the access permission control characters private and public of the member are not added;
During initialization, the scope operator is used to indicate the class to which it belongs;
So we can get the format of static data member initialization:
<Data type> <class name >:< static data member name >=< value>
(9) to prevent the influence of the parent class, you can define a static variable of the same as the parent class in the subclass to avoid the influence of the parent class. Here, we need to note that static members are shared by the parent class and subclass, but we have repeatedly defined static members. Will this cause errors? No, our compiler uses a wonderful method: Name-mangling is used to generate a unique flag.