1. Basic router inspection commands
Show version
Show Processes
Show protocols
Show mem
Show IP Route
Show startup-config
Show running-config
Show flash
Show interfaces
Ii. Basic route configuration commands
Enter: config Terminal/memory/Network
Frequently Used commands for network configuration: Copy and Load
1. ID: Hostname
2. startup ID: banner startup ID
3. Interface: interface port number
4. Password: line 0 6
Login
Passwd Password
Enable password/secret password
5. interface:
1) configure the port
Interface port number
Clock rate (64000)/* configure in serial port */
Bandwidth bandwidth (56 by default)/* configure in serial port */
Media-type media type/* on the Ethernet port */
Early-Token release/* on the ring network port */
Ring-speed 16/* on the ring port */
No Shutdown
Write memory
2) Check the port
Show interfaces
Show Controllers
6. Configure the environment
1) Guide Mode
Boot system flash iOS-filename
Boot system TFTP iOS-filename TFTP-address
Boot system ROM
2) configure the register value
Config-register 0x2102
7. View neighbor routes
Show CDP Interface
Show CDP neighbors [detail]
Show CDP entry routings
8. IP Address Configuration
IP address Network Address Mask
IP host name address
IP name-server address 1 server address 2...
IP domain-lookup NSAP
Show hosts
Ping host name/IP Address
Trace host name/IP Address