Create a CentOS6.6 and CentOS7.0USB boot disk
Create a CentOS 6.6 and CentOS 7.0 USB boot disk
The production methods of CentOS 6.6 and CentOS 7.0 are different.
1. Create a CentOS 6.6 USB boot disk
Required tools:
A. UltraISO (used to create a U disk for startup)
B. CentOS-7.0-1406-x86_64-DVD.iso (bin images are recommended)
C. One USB disk, more than 8 GB
D. vesamenu. c32 file -- used to replace the default file CentOS 6.6
The procedure is as follows:
1. Run UltraISO as an administrator
2. File-open-select a CentOS-7.0-1406-x86_64-DVD.iso, as shown in
3. Start-Write the disk image, format the USB flash disk, and click write. <喎?http: www.bkjia.com kf ware vc " target="_blank" class="keylink"> VcD4KPHA + yOfPws28LLTzuMUxMLfW1tPX89PS0LTI683qsc + jrDwvcD4KPHA + pgltzybzcm9 "http://www.2cto.com/uploadfile/Collfiles/20150110/20150110092717290.jpg" alt = "\">
4. boot the USB flash drive properly. However, there is a problem with the CentOS-7.0-1406-x86_64-DVD.iso, the prompt Press the <Enter> key to begin the installation process is prompted during installation, but pressing Enter does not respond. Replace "vesamenu. c32" under the syslinux directory in the created boot disk with the attachment in this article.
Ii. Create a CentOS 7.0 USB boot disk
Required tools:
A. USB writer (used to create a U disk for startup)
B. CentOS-7.0-1406-x86_64-DVD.iso (bin images are recommended)
C. One USB disk, more than 8 GB
The procedure is as follows:
1. Run USB writer as an administrator, as shown in figure
2, source select CentOS-7.0-1406-x86_64-DVD.iso, target select U disk, and then click write and start writing win7.iso U disk, about 10 minutes later, the production is complete