In Linux, the plug-in aMule and the BT client Azureus are unknown. I heard that the Download Software mlDonkey is highly integrated (a bit like thunder), so I tried it from the source. Unfortunately, I don't know why it cannot be started. Forget it. Use the callback plug-in aMule and the BT client Azureus. You can't wait to use YUM to install the software and set it up. Please come with me: Azureus first. Linux firewalls are much better than windows firewalls, so you want to use them well. If you are like me
In Linux, the plug-in aMule and the BT client Azureus are unknown. I heard that the Download Software mlDonkey is highly integrated (a bit like thunder), so I tried it from the source. Unfortunately, I don't know why it cannot be started. Forget it. Use the callback plug-in aMule and the BT client Azureus.
You can't wait to use YUM to install the software and start setting up. Please come with me:
First, Azureus. The firewall in Linux is much better than that in windows. Therefore, if you want to use the firewall well, if you are in a LAN like me and access the Internet through a router, you can enable UPNP support in the router, DMZ host, then set the firewall of Fedora. The firewall configuration file is in/etc/sysconfig/iptables. In the terminal, use root to edit iptables and add these two sentences (assuming that the Azureus port is set to 21237)
-A input-I eth2-p udp-m udp -- destination-port 21237-j ACCEPT
-A input-I eth2-p tcp-m tcp -- destination-port 21237-j ACCEPT
Save and exit. Test the NAT of Azureus. If the returned result is normal, you can download it through BT. However, the speed is very slow and may be in the intranet. Dizzy, there is time to study again, usually less use of BT, more use of electricity, huh, huh.
Now, it's aMule's turn to play. First, we recommend you add this webpage to your favorites: http://ed2k.2x4u.de/index.html. It is very useful to update the donkey server every 6 minutes. Fill in the all servers: server. met address in the server column of aMule, and ask aMule to update the server list. Just like setting the Azureus firewall, open the TCP and UDP ports of the plug-in. (assume that the aMule TCP port is set to 4662, And the UDP port is set to 4672, UDP Extend Server TCP + 3 is 4665 )? Br/>
-A input-I eth2-p tcp-m tcp -- destination-port 4662-j ACCEPT
-A input-I eth2-p udp-m udp -- destination-port 4672-j ACCEPT
-A input-I eth2-p udp-m udp -- destination-port 4665-j ACCEPT
If you have used emule in windows, replace server. met (under the config folder) copy with "your main Folder/. aMule ". Otherwise, the connection may be disconnected. Well, after setting it up, there should be no problem connecting to ED2K. Now it's KAD. You need to use the following two addresses:
Http://www.emule-inside.net/nodes.dat
Http://renololo1.free.fr/e/nodes.dat
As the update address of Kad nodes. We recommend that you use http://www.emule-inside.net/nodes.dat. Do not use the default one.
After the update, the KAD network returns OK, and the cable entries are displayed.
Note: We recommend that you first update the KAD and then connect to the ED2K server. Otherwise, the program may exit.
At present, the speed of aMule is good, but it is found that the ED2K server of aMule is easy to lose connection, so I have time to study it again.
Author: say2me from: Jing Miao Ge