Fedora18 live cd hard drive installation (a dual system with win7) seems to be a lot of such articles on the Internet, but it should be clear that some posts talk about the installation of DVDs. the fedora18 of iso is four or more GB, And I want to install the live cd version, less than 1 GB, so the guiding method is different. to Install the DVD version, it is relatively simple. Install easybcd and configure grub: title Fedora Install kernel (hd0, x)/vmlinuz linux askmethod initrd (hd0, x) /initrd. img
There are a lot on the Internet, but I will not introduce it in detail. however, installation of live cd, especially hard disk installation, is a waste of time, mainly because the installation interface is not guided. After combining the advantages of the two posts on the Internet, the installation interface is finally entered, now, we will record the configuration and share it with you:
Title Fedora Install root (hd0, x) kernel/isolinux/vmlinuz0 root = live:/dev/sdaN ro rd. live. image quiet rhgb rootfstype = auto initrd/isolinux/initrd0.img the code above x refers to the partitions of your hard disk. For example, my hard disk partition is the main partition C, and D and E are in the same extended partition, F primary partition. In this case, the LiveCD image is placed on the drive C, x is equal to 0, and F is placed on the drive, and x is equal to 3. (D and E disks are not primary partitions and cannot be placed in the LiveCD image.) N is equal to x + 1. Note that some tutorials use the installed fedora for and 16, and use liveimg instead of ro rd. live. the installation interface is not accessible. You can only access the fedora18 desktop without the live system user. If you use root to enter the desktop, you will find that there is no option to install to hard drive. If google does not find this option, congratulations, there are all kinds of answers, and there is no solution at all. after the correct grub configuration is changed, everything will be normal.