Iperf3 practice, iperf3

Source: Internet
Author: User

Iperf3 practice, iperf3

The basic commands are the same for iperf and iperf3:

Sample iperf/IPERF3 COMMANDS
Server:
Iperf/iperf3-s Start server on the default port
Iperf-s-w 32 M-D/iperf3-s-D Start server with larger TCP window, and in daemon mode
Iperf-i1-u-s-p 5003/iperf3-s-p 5003 Start UDP server on port 5003, and give 1 sec interval reports
Client
Iperf/iperf3-c remotehost-I 1-t 30 Run a 30 second tests, giving results every 1 second
Iperff/iperf3-c remotehost-I 1-t 20-r Run a test from remotehost to localhost
Iperf/iperf3-c remotehost-I 1-t 20-w 32 M-P 4 Run a test with 4 parallel streams, and with a 32 m tcp buffer
Iperf/iperf3-c remotehost-u-I 1-B 200 M Run a 200 Mbps UDP test
 

Iperf3 adds a number of additional features. for example, the-I mode now reports TCP retransmit info (and is on by default), and the verbose mode now gives a lot of useful information on CPU usage, etc. other new options include:

NEW IPERF3 COMMANDS
Client:
Iperf3-c remotehost-I .5-0 2 Run the test for 2 seconds before collecting results, to allow for TCP slowstart to finish. (Omit mode)
Iperf3-Z-c remotehost UseSendfile() System call for "Zero Copy" mode. This uses much less CPU.
Iperf3-c 192.168.12.12-T s1 & iperf3-c 192.168.12.13-T s2 Run tests to multiple interfaces at once, and label the lines to indicate which test is which
Iperf3-c remotehost-J Output the results in JSON format for easy parsing.
Iperf3-A, 4-c remotehost Set the CPU affinity for the sender, Handler Er (cores are numbered from 0). This has the same affect as doing 'numactl-C 4 iperf3 '.

Iperf3-c 10.20.1.20-A2, 2-T "1" &; iperf3-c 10.20.1.20-p 5400-A3, 3-T "2 "&

Run 2 streams on 2 different cores, and label each using the "-T" flag.
Iperf3 thread model

In order to keep the code as simple and maintainable as possible, iperf3 is single threaded. this means that you may be CPU-bound on some hosts, or on 40G/100G memory. to run parallel stream iperf3 on mutiple cores, use the method shown in the table above.

Practice:

 

[Root @ CentOS7 iperf-3.1.2] # iperf3-s

-----------------------------------------------------------

Server listening on 5201

-----------------------------------------------------------

Accepted connection from 192.168.56.106, port 58465

[5] local 192.168.56.103 port 5201 connected to 192.168.56.106 port 58466

[ID] Interval Transfer Bandwidth

[5] 0.00-1.00 sec 49.9 MBytes 418 Mbits/sec

[5] 1.00-2.00 sec 175 MBytes 1.47 Gbits/sec

[5] 2.00-3.00 sec 148 MBytes 1.25 Gbits/sec

[5] 3.00-4.00 sec 164 MBytes 1.38 Gbits/sec

[5] 4.00-5.00 sec 234 MBytes 1.96 Gbits/sec

[5] 5.00-6.00 sec 227 MBytes 1.91 Gbits/sec

[5] 6.00-7.00 sec 222 MBytes 1.86 Gbits/sec

[5] 7.00-8.00 sec 169 MBytes 1.42 Gbits/sec

[5] 8.00-9.00 sec 143 MBytes 1.20 Gbits/sec

[5] 9.00-10.00 sec 226 MBytes 1.90 Gbits/sec

[5] 10.00-11.00 sec 189 MBytes 1.58 Gbits/sec

[5] 11.00-12.00 sec 101 MBytes 850 Mbits/sec

[5] 12.00-13.00 sec 188 MBytes 1.58 Gbits/sec

[5] 13.00-14.00 sec 207 MBytes 1.74 Gbits/sec

[5] 14.00-15.00 sec 215 MBytes 1.81 Gbits/sec

[5] 15.00-16.00 sec 218 MBytes 1.83 Gbits/sec

[5] 16.00-17.00 sec 217 MBytes 1.82 Gbits/sec

[5] 17.00-18.00 sec 217 MBytes 1.82 Gbits/sec

[5] 18.00-19.00 sec 169 MBytes 1.42 Gbits/sec

[5] 19.00-20.00 sec 230 MBytes 1.93 Gbits/sec

[5] 20.00-21.00 sec 228 MBytes 1.91 Gbits/sec

[5] 21.00-22.00 sec 220 MBytes 1.85 Gbits/sec

[5] 22.00-23.00 sec 227 MBytes 1.91 Gbits/sec

[5] 23.00-24.00 sec 231 MBytes 1.94 Gbits/sec

[5] 24.00-25.00 sec 232 MBytes 1.95 Gbits/sec

[5] 25.00-26.00 sec 146 MBytes 1.23 Gbits/sec

[5] 26.00-27.00 sec 200 MBytes 1.67 Gbits/sec

[5] 27.00-28.00 sec 180 MBytes 1.51 Gbits/sec

[5] 28.00-29.00 sec 176 MBytes 1.47 Gbits/sec

[5] 29.00-30.00 sec 170 MBytes 1.43 Gbits/sec

[5] 30.00-31.00 sec 217 MBytes 1.82 Gbits/sec

[5] 31.00-32.00 sec 215 MBytes 1.80 Gbits/sec

[5] 32.00-32.54 sec 116 MBytes 1.79 Gbits/sec

-------------------------

[ID] Interval Transfer Bandwidth

[5] 0.00-32.54 sec 0.00 Bytes 0.00 bits/sec sender

[5] 0.00-32.54 sec 6.12 GBytes 1.62 Gbits/sec receiver

[Root @ CentOS6 iperf-3.1.2] # iperf3-c 192.168.56.103-I 1-t 30 Connecting to host 192.168.56.103, port 5201 [4] local 192.168.56.106 port 58466 connected to 192.168.56.103 port 5201 [ID] Interval Transfer Bandwidth Retr Cwnd [4] 0.00-1.00 sec 59.3 MBytes 497 Mbits/sec 137 181 KBytes [4] 1.00-2.00 sec 214 MBytes 1.80 Gbits/sec 46 211 KBytes [4] 2.00-3.00 sec 129 MBytes 1.08 Gbits/sec 1 74.9 KBytes [4] 3.00-4.00 sec 222 MBytes 1.86 gbits/sec 46 209 KBytes [4] 4.00-5.00 sec 253 MBytes 2.12 Gbits/sec 0 235 KBytes [4] 5.00-6.00 sec 240 MBytes 2.01 Gbits/sec 45 187 KBytes [4] 6.00-7.00 sec 249 MBytes 2.09 Gbits/sec 0 198 KBytes [4] 7.00-8.00 sec 135 MBytes 1.14 Gbits/sec 1 80.6 KBytes [4] 8.00-9.00 sec 210 MBytes 1.77 gbits/sec 46 209 KBytes [4] 9.00-10.00 sec 236 MBytes 1.98 Gbits/sec 0 233 KBytes [4] 10.00-11.00 sec 94.7 MBytes 795 Mbits/sec 92 39.6 KBytes [4] 11.00-12.00 sec 203 MBytes 1.71 Gbits/sec 0 94.7 KBytes [4] 12.00-13.00 sec 225 MBytes 1.89 Gbits/sec 0 122 KBytes [4] 13.00-14.00 sec 235 MBytes 1.97 gbits/sec 0 144 KBytes [4] 14.00-15.00 sec 236 MBytes 1.98 Gbits/sec 0 157 KBytes [4] 15.00-16.00 sec 234 MBytes 1.96 Gbits/sec 0 164 KBytes [4] 16.00-17.00 sec 185 MBytes 1.55 Gbits/sec 46 182 KBytes [4] 17.00-18.00 sec 243 MBytes 2.04 Gbits/sec 0 219 KBytes [4] 18.00-19.00 sec 252 MBytes 2.11 gbits/sec 45 171 KBytes [4] 19.00-20.00 sec 233 MBytes 1.96 Gbits/sec 0 191 KBytes [4] 20.00-21.00 sec 251 MBytes 2.10 Gbits/sec 0 201 KBytes [4] 21.00-22.00 sec 247 MBytes 2.07 Gbits/sec 0 206 KBytes [4] 22.00-23.00 sec 252 MBytes 2.11 Gbits/sec 0 214 KBytes [4] 23.00-24.00 sec 164 MBytes 1.38 gbits/sec 1 66.5 KBytes [4] 24.00-25.00 sec 214 MBytes 1.79 Gbits/sec 0 122 KBytes [4] 25.00-26.00 sec 202 MBytes 1.69 Gbits/sec 0 164 KBytes [4] 26.00-27.00 sec 197 MBytes 1.66 Gbits/sec 0 192 KBytes [4] 27.00-28.00 sec 187 MBytes 1.57 Gbits/sec 1 148 KBytes [4] 28.00-29.00 sec 235 MBytes 1.97 gbits/sec 0 160 KBytes [4] 29.00-30.00 sec 230 MBytes 1.93 Gbits/sec 0 170 KBytes ------------------ ---[ID] Interval Transfer Bandwidth Retr [4] 0.00-30.00 sec 6.12 GBytes 1.75 Gbits/sec 507 sender [4] 0.00-30.00 sec 6.12 GBytes 1.75 Gbits /sec extends er iperf Done. [root @ CentOS6 iperf-3.1.2] # iperf3-c 192.168.56.103-u-I 1-B 200 MConnecting to host 192.168.56.103, port 5201 [4] local 192.168.56.106 port 48953 connected to 192.168.56.103 port 5201 [ID] Interval Transfer Bandwidth Total limit rams [4] 0.00-1.00 sec 22.6 MBytes 189 Mbits/sec 2891 [4] 1.00 -2.00 sec 24.0 MBytes 201 Mbits/sec 3068 [4] 2.00-3.00 sec 23.6 MBytes 198 Mbits/sec 3025 [4] 3.00-4.00 sec 23.8 MBytes 200 Mbits/sec 3043 [4] 4.00-5.00 sec 23.9 MBytes 200 Mbits/sec 3055 [4] 5.00-6.00 sec 23.9 MBytes 200 Mbits/sec 3059 [4] 6.00-7.00 sec 23.7 MBytes 199 Mbits/sec 3038 [4] 7.00-8.00 sec 23.9 MBytes 200 Mbits/sec 3055 [4] 8.00-9.00 sec 23.9 MBytes 200 Mbits/sec 3065 [4] 9.00-10.00 sec 23.9 MBytes 201 Mbits/ sec 3053--[ID] Interval Transfer Bandwidth Jitter Lost/Total limit rams [4] 0.00-10.00 sec 237 MBytes 199 Mbits/sec 0.027 MS 500/30352 (1.6%) [4] Sent 30352 extends rams iperf Done.

 

FAQ:

1. q: [root @ CentOS6 iperf-3.1.2] # iperf3-c 192.168.56.103-f M-I 2-w 300 K-n 100 M-t 30-diperf3: parameter error-only one test end condition (-t,-n,-k) may be specifiedA: Remove-n2.-d is no longer bidirectional, It is debug, and currently it does not support bidirectional, some articles on the Internet are incorrect.

Deprecated flags (currently no plans to support ):

-d, --dualtest           Do a bidirectional test simultaneously-r, --tradeoff           Do a bidirectional test individually-T, --ttl                time-to-live, for multicast (default 1)-x, --reportexclude [CDMSV]   exclude C(connection) D(data) M(multicast)                              S(settings) V(server) reports-y, --reportstyle C      report as a Comma-Separated Values

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.