ifconfig is a command that is used to display or configure network devices in a Linux system.
Ifconfig English full Name: Network interfaces configuring (Web interface Configuration)
Under the Windows system, you need to use DOS command ipconfig to display the IP address information command ipconfig English full name: Internet Protocol Configuring (IP address configuration)
= = = " Ip:internet Protocol (Interconnection protocol between networks)
Enter the Ifconfig command under Linux to see the following information
Description
eth0 represents the first NIC,
- Link encap(connection type): Ethernet (Ethernet)
- HWaddr(Physical address of the network card) For example, the physical address (MAC address) of the network card is: fa:16:3e:29:3c:92
- inet addr (IP address of the network card),Bcast (broadcast address), Mask (mask address).
- up (for Nic on)RUNNING(network cable on behalf of the NIC is connected)multicast(support multicast)MTU: 1500 (Maximum transmission Unit): 1500 bytes
Lo represents the loopback address of the host.
Linux command: Ifconfig