NetScreen Firewall common Commands-management chapter
Ns25-> Get admin//view firewall management settings
HTTP port:80, HTTPS port:443
TELNET port:23, SSH port:22
Mng Host ip:192.168.0.16/255.255.255.255
Mail alert:off, mail Server:
E-mail Address:
e-mail Traffic Log:off
Configuration Format:dos
Device reset:enabled
Hardware reset:enabled
Admin privilege:read-only (Remote Admin has read-only privileges)
Max Failed Admin Login Attempts:3
To modify the administrator password:
Ns25-> Set Admin password 12345678//change Administrator password to 12345678
To modify the administrator user name:
Ns25-> Set admin name morphoneme//Change the default administrator user name to Morphoneme
Password have been restored to default "NetScreen". For security reasons password immediately. After changing the administrator account, the Administrator password system is automatically changed to NetScreen
Ns25-> Set Admin user liusuping password 12345678 privilege all//Add an Administrator account named "liusuping" with a password of 12345678, the permission is readable and writable, All can be changed to Read-only
ns25-> unset Admin user liusuping//delete admin account named Liusuping
Ns25-> set admin telnet port 1001//Switch firewall telnet to 1001
Ns25-> Set Admin Manager-ip 192.168.0.16//Only allow IP address for 192.168.0.16 Computer Management firewall, note: Only one IP address can be added at a time, cannot join the network segment
ns25-> unset admin Manager-ip 192.168.0.16//Cancel only allow computers with IP address 192.168.0.16 to manage firewalls
ns25-> unset admin Manager-ip All//Remove IP restrictions from the management firewall, sometimes the use of the Web or telnet can not log into the firewall, but the firewall is working properly, it is possible to set the administrative access IP restrictions, You need to use the console line to remove this restriction to properly log in to the firewall.
Ns25-> Set Admin Port 1001//Change firewall Web management ports to 1001
NetScreen Firewall common Commands-management chapter