Redhat LAN Installation Solution _unix Linux

To verify the LAN installation of Linux, an experiment has been done in the last two days to write a more complete article. 1. The operating environment of this article is the Redhat 9.0,vsftpd version is Redhat 9.0 with the vsftpd-1.1.3-8.i386.rpm, in the installation disk of the third Zhang Zhong 2. VSFTPD realization of the most basic purpose: the system exists in the real user can log into the FTP, can use anonymous access. 3. Server IP and DNS set the first network card ip:192.168.0.1 mask: 255.255.255.0 gateway is not set: The second network card: ip:192.168.0.2 Mask: 255.255.255.0 gateway is not set Because my operating environment is a small local area network, so the IP of other machine is in 192.168.0 this network segment. ADSL is connected to the first network card on the server. The second NIC on the server is the hub, and the other clients are connected to the hub. In order to allow ADSL access to the Internet, because they set the IP manually, so DNS to set up their own, DNS is as follows: 202.96.134.133 202.96.168.68 Setup tool is: [root@linuxsir001 root]# Redhat-config-network first, use VSFTP to set up FTP server, VSFTP server is the best FTP server software, the advantage is small size, can be customized strong, high efficiency 1. Check to see if the VSFTPD software is installed [root@linuxsir001 root]# Rpm-qa | grep vsftpd If there is no display, indicating that the VSFTPD is not installed, if the following prompts are shown, the proof is already installed. [Root@linuxsir001 root]# Rpm-qa | grep vsftpd vsftpd-1.1.3-8 i redhat 9.0, with its own VSFTPD package vsftpd-1.1.3-8 version for this post agreed. [root@linuxsir001 root]# RPM-IVH vsftpd*.rpm 2. Open the VSFTP server. [root@linuxsir001 root]# NTSYSV the VSFTPD server to open, that is, after running the NTSYSV command, the VSFTPD service selected. [*] Vsftpd