Solaris 2.x for Linux Server guard

Solaris 2.x for Linux Server guard (reproduced)

Generally, disks are not available on the X86 PC, and most of the interfaces used on the workstations are SCSI. therefore, in the case of server guard, it is not like a PC to be enabled.
It can use CDROM boot to install the system on the host of the Linux instance.
First, when the host is started, press stop-a to enter the BIOS. It will show the "OK #" character.
Then, you only need to input boot CDROM on the back of OK #, that is...
OK # boot CDROM
Then, you will see the starting and starting of the CDROM, and you will be able to start and install it .....

Starting with the server guard Solaris

Step 1:After CDROM boot, the system will upgrade your computer hardware. When he finished the renewal, he would find the configuration item he purchased. Basically, there would be no problems.
Step 2:At this time, he will jump back to the text mode and have the following options:

1. Solaris interactive

2. Custom jumpstart

3. Solaris Web Start

We are currently working on the task of security protection. Therefore, when "1" is entered and "enter" is pressed, the following words will pop up and the boot script will be started.
Booting kernel/Unix...
SunOS release 5.6 version generic
Copyright (c) 1983-1997, Sun mircosystem, Inc.
Step 3:The next action is to complete the following three steps:
1. idenify peripheral devices.
2. Identify your system.
3. Install Solaris software.
And tell you that he cannot confirm the configuration.
-The mouse cannot be used
-Keyboard does not have function key ,....
"F2" begin transaction, and then press "F2" to start configure your system.
Step 4:
Configure Device
--------------------------------------------------------------------
[] No change needed-test/Save and exit
[*] Change Graphics Device/monitor // change the VGA Card and monitor display modes
[] Change keyboard // modify keyboard types and settings
[] Change pointing device // you can change the values of the cursor (ex. Mouse)
Push space bottom to choose 2nd Item "Graphics Device", and choose suit item for your VGA Card and monitor.
I chose winfast s600dx 4 MB. [*] S3 ViRGE (4 MB). Next, select monitor type. My name is NEC 15, which is usually the 15 screen, so I chose
[*] Multifrequency 38 kHz (up to 1024*768 interlaced)
PS: If your screen capture is better than screen capture, you can choose a monitor type with better performance, but you can choose the highest value at least once, there is a running sequence in the backend to check whether the system can run normally. Therefore, we recommend that you start with a low threshold because it is not an appropriate choice, it may lead to a jump from the head of the machine, or even worse, a rolling screen. Next, select the screen size:
[*] 15-inch (38 cm)
The next step is resolution and color. If your VGA Card has a memory of 1 MB, select a low color and resolution. I have 4 MB options:
[*] 1024*768-166777216 colors @ 72Hz

Step 5:F2 then returns to step 4. Check the VGA, monitor, and mouse listed above... is it your choice? If it is correct, then we will continue to continue using F2, F2... testing ..., if it is normal, it will produce a color lag and ask whether the content you see is normal. If it is normal, press "yes". If it is not, press "no ", if it is abnormal to see the screen comment at this time, press "no" to jump back. If you want to have a higher resolution and color, it will jump back and set a higher value.
After everything is normal, he will allow you to select the characters in the security questions, for Chinese or English. If you want to set it to Chinese, choose zh_tw.big5 on the left and then press "fail, the subsequent prompt text will be displayed in Chinese. Therefore, I may explain some questions.
Set the value as follows: (Please set the value according to your own environment)
Host Name: share1
Network Connection: Yes
IP Address: 140. 126 .*.*
Confirm
Service name: <> NO
Sub-Network: <> Yes
Network mask: 255.255.255.0
Cut partition: the easiest way to look at your preferences,
Swap space: Ram size * 2
/"Root Space": disk space-swap space
After all the options are selected, the system will start to install it on the hard disk, which is about 25-40 minutes later. After the installation is complete, the disk will be moved again. Please remove the disk from the camera, then OK!
Ease of Network Configuration
1. ifconfig 140. 126. *. * nei0 up netmask limit 255.255.0 broadcast 140. 126. *. 255
^ Network CASD ^ Class C netmask ^
2. Change:/etc/resolv. conf and/etc/nsswitch. conf
3. sync; reboot

-----------
Podscat Kuo
E-mail: chunpo@csie.chu.edu.tw
Original: Institute of Information Engineering, middle school