How does one modify the Internet access address port of the intranet version of the peanut shell ??

For example, the domain name is free of charge when registering a peanut shell, because it is in the internal network, so the intranet version is used, set the intranet host, after Port ING, save, the Internet access address is automatically generated. How do I set an Internet access address without a port or port 80...

For example:

The domain name is free of charge when registering a peanut shell. because it is in the internal network, the intranet version is used. after the intranet host is configured, the Internet access address is automatically generated after the Port ING is saved.

What should I do if I want an Internet access address without a port or port 80 ?? Need to purchase ?? (I was trying to use it in the test. only port 80 or port 443 is supported. I don't know how to fix it !!)

Why do you want to be confused ??

Reply content:

For example:

The domain name is free of charge when registering a peanut shell. because it is in the internal network, the intranet version is used. after the intranet host is configured, the Internet access address is automatically generated after the Port ING is saved.

What should I do if I want an Internet access address without a port or port 80 ?? Need to purchase ?? (I was trying to use it in the test. only port 80 or port 443 is supported. I don't know how to fix it !!)

Why do you want to be confused ??

I used peanut shells a few times. it was very difficult to use and I gave up.
This intranet version should be a port ing function. the traffic first flows to the server of the peanut shell, then the peanut shell sends the traffic to the client, and then the client forwards the traffic to your intranet server. If this is the principle, port 80 is useless.

What you need should be the standard edition or router settings (that is, running on a vro, many vrouters support this, but the effect is uneven ). In this way, you can map your public IP address to the domain name given by the peanut shell, and the traffic will directly go to your internet portal.

However, it is not recommended that you use the home broadband to map port 80.
1. the state and operator stipulate that individual broadband users are not allowed to open common ports such as port 80, port 443, and port 8080. Such as Beijing Unicom, which is well-known and sometimes accessible, is blocked once it is scanned. There is no obvious limit on the high port, but it will still be checked if the traffic is abnormal.
2. for second-level operators, TCP ports do not seem to be capable of listening, or there is no real IP address at all (small pools and large pools ).

It is recommended that you buy a cheap version of VPS for development or testing, so that there will be real and fixed IP addresses. You can also buy a domain name. If you do not want to buy a domain name, you can directly write the static IP address to the dynamic domain name 233.

Home broadband + dynamic domain names are not suitable for special scenario development (such as mandatory port 80), and are only suitable for personal private use.

20160713 supplement:

Vps is not a virtual host. The two concepts must be differentiated. Vps is a type of 'virtual host', not 'virtual host '.
A vm is an http-based service that can only run web services and has many restrictions. you cannot change the port and add a certificate at will. The virtual host service on the network is generally not cheap, and is paid annually. it is not suitable for development environments and is only suitable for production environments.
A virtual machine is a virtualization-based service. it is an independent server. you can install an operating system (according to the virtual architecture, there may be operating system restrictions. generally, linux is the most common and inexpensive, good performance, no waste of resources ).

Daily access to the website such as weibo.com is actually a http://weibo.com, for http protocol, his port is 80 by default, if you want to change the port (such as to 8080), then you need to access in a similar way: http://yourdomain.com: 8080. There is also https, such as the https://segmentfault.com, whose default port is 443, is based on a secure protocol transmission of http.
Vps will give you a real and fixed ip address (suppose it is 1.2.3.4). after you install apache, nginx, and other software on vps that can provide http services and run them correctly, then http: // 1.2.3.4 can access your website web service.

If you want to read this content, we recommend that you read some relevant information. Vps is a virtual machine. you can install a virtuallbox (open-source free) or vmware series locally (most commercial products are charged, but there are also many useful free products) as a development and testing environment.

I do not know whether the developed test account can use non-port 80. I have not tried it. I guess the developer Test number can use non-port 80. You can try it first.