How to install CentOS 7 in Win10

How to install CentOS 7 in Win10

Recently, I tried to learn Linux, so I bought a book from laruence according to my suggestions on the Internet. For later learning convenience, prepare to install CentOS7. After preparing the image file and USB flash drive, I started the construction at on the 4th. I thought it would take a few hours to complete the work. For the first time, I realized what is the gap between ideal and reality. In view of the complexity of CentOS7 installation and the popularity of laruence, I decided to write down the entire process of my installation, hoping to help those who want to learn. In this tutorial, I wrote out the problems I encountered, because I learned a lot from the process of solving these problems. If you are a little white, I hope you can take a look.

In addition, thank you for your criticism ~

I declare in advance that there is no option to start up items during CentOS 7 installation. That is to say, after CentOS is installed, we cannot open win10. So before this problem occurs, we have to think about solutions, therefore, we recommend that you first take a look at Step 5.

Tools and materials

1. A networked computer, or download the software first

2. Two USB flash drives, preferably 8 GB or above

3. required file: CentOS7 image file (ISO file)

4. Required Software: UltraISO, old Mao Tao, EasyBCD

Step 1. Split disk space for Linux in Windows

---------------------------- Hackers with two hard disks manually skip -------------------------------

Right-click "this computer"-"manage"

　　

　　

　　

Don't worry, it won't break the computer.

Step 2: Create a USB flash drive

It took nearly two hours to complete this step. In fact, it was not difficult, but the tutorial I was reading was an early stage, so I had taken a lot of detours. When we use UltraISO, that is, Apsara stack, We must download the latest version online. It doesn't matter even if we try it out, because we just need to use it. The following is the production process.

1. Open the ISO file

Click "file"-"open" and select the place where you saved the ISO file.

　　

2. Write Data to the USB flash drive

　　

When writing data, the software will format the USB flash disk. Therefore, you must back up important data in the USB flash disk before writing data.

Although it will be automatically formatted, We Can format it ourselves just in case.

　　

Then confirm all the steps ~~~

After formatting, write the data. Note the parameter selection.

　　

　　

　　

At this point, the first step is completed, and the entire process is divided into five or six types. It took me two hours to delete several files before writing, and then copy the original ISO file after writing.

Then the problem arises. After the USB flash drive is ready, its type is FAT32. That is to say, files larger than 4 GB cannot be copied, and my ISO file is exactly 4.01 GB, so the following occurs during the copy process:

　　

At that time, I was speechless. My USB flash drive was 32 GB. How could I not store 4 GB of Data? So I wondered if I had bought a fake USB flash drive ...... but I thought about it. I also used this USB flash drive to transfer the GB PS tutorial a few days ago. How could it be false? The result is as follows: in FAT32 format, a single file cannot exceed 4 GB.

What should we do? At that time, I was very witty (and proved stupid later) to reformat the USB flash disk and format it into the NTFS format, so there is no limit on the file, repeat the above steps ...... however, it is useless. Or cannot be copied. How is it possible? I changed the format, but after opening it, I found it changed to FAT32 again, so I continued BD. I found that almost all the recording software formatted the USB flash disk as FAT32. Therefore, I used another software to change the written USB flash disk to NTFS, and then copied the ISO file. The result is that the boot disk cannot be identified by the computer at startup ...... however, it took more than two hours to continue after the system was started. In the corner of an article, it was found that the current ISO file does not need to be copied when it is burned, with the attitude of using dead horses as active horse doctors, repeat the above burning steps and then restart the computer. The results are successfully identified.

So here I would like to remind you that you must pay attention to the release time of the tutorial when reading the tutorial. If it was a long time ago, you should be careful, because the changes may be very large.

For more details, please continue to read the highlights on the next page:

1 2 3 4 Next Page