Install the tool bmon for real-time network bandwidth detection in CentOS

Install the tool bmon for real-time network bandwidth detection in CentOS

First download the rpmforge-release extension rpm package

32-bit operating system: wget http://www.sudu.us/Tools/bmon/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

64-bit operating system: wget http://www.sudu.us/Tools/bmon/rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm

Install rpmforge-release Extension
Rpm-Uhv rpmforge-release-0.3.6-1.el5.rf.i386.rpm or rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm

Then you can use yum install to install bmon.

Yum-y install bmon

After the installation, run the bmon command to open it.
Bmon-p eth0
Then, bmon will display the monitoring interface. Enter g to open the graphic monitoring bar, and enter d to enable the detailed mode (if not, enlarge the terminal window ).

You can monitor network traffic in shell (with dynamic results)
RX: streaming
TX: Outbound
View in basic mode:

# Bmon-o ascii-p eth0

Of course, you can also output the results to the browser. If you are interested, you can play.

The webpage output command is as follows:
Bmon-I distribution: multicast-o null-O html: path =/var/htdocs/
Then you can use a network server such as ngix to configure the website directory as the output directory. Then you can remotely monitor the network traffic of the server.