Linux drawing schematic and PCB
The famous Allegro and classic Protel 99SE under Windows are not supported by Linux operating systems, and it is unavoidable to look at schematics and PCBs for Linux driver development.
There are three general ways of doing this:
1. Host uses Windows system, Linux installed in virtual machines such as VMware so that you can use the software under Windows to see the schematic and PCB;
2. In turn, a Windows virtual machine is loaded in the Linux system with the first article. Or a machine with a pure Windows system to look at the schematic diagram specifically;
3. Developers using a pure Linux system will try to install some schematic PCB software through the sudo apt-get install, but are some lightweight software that cannot be compared to Windows;
4. Or is to convert the schematic PCB to PDF in the Linux system to see, but after all, there is no professional software to use;
5. Recently found a schematic PCB software called Eagle that can support three major operating systems simultaneously.
Here is a record of the installation process:
1. Download
: http://www.cadsoftusa.com/download-eagle/
2. Installation
3. Trial
Linux drawing schematic and PCB
