Linux Remote Login Windows system

The first step, the realization of the Linux host and Windows host interconnection is a prerequisite for remote landing
First, the Linux host based on the VMware environment and the Windows Host network mode select host mode only.

Then close the remote end Windows7 firewall, enter "Firewall.cpl" in the Run interface, open the Windows7 firewall settings, turn off the firewall.

Then configure the Linux host with the Windows host on the same LAN, first look at the Linux IP, and then configure Windows7 IP, so that both IP in the same network segment.

Finally, enter the ping command in the Linux system to see if the Windows host can be interconnected.

Step two, install the remote login package on the Linux system
First attach the disc file to the Linux system, right click on the gray disc icon on the lower left side of the Linux virtual machine, click "Settings", go to the Virtual machine settings boot interface, check "connected" on the Device status option, so the disc file is mounted.

Then edit the/etc/fstab configuration file, press "G" key to the last line in command mode, then press "O" key to switch to input mode, enter "/dev/sr0/mnt iso9660 defaults 0 0" in the last line, press "ESC" key to switch to command mode, then press ":" Key to enter " Wq "Save for automatic mounting

Then enter the Mount–a command to read the Fstab file information, mount it again, and then enter the DF–H command to see if the mount was successful.

Then enter the "cd/mnt" command into the Mount directory path, view the packages package, go to packages/path, enter the "RPM–IVH" command to install a remote Installation Rdesktop sub-module package libao-0.8.8-7.1.el6.x86 _64.RPM,LIBSAMPLERATE-0.1.7-2.1.EL6.X86_64.RPM,LIBSNDFILE-1.0.20-5.EL6.X86_64.RPM, and then installs the Rdesktop package, but displays the error.

In order to solve the problem of installing a particular package and then manually install other dependent packages, create a yum repository, delete the default repo file under the/ETC/YUM.REPOS.D path, create a new file called Abc.repo, save the edits, enter Yum The list command shows a series of installation packages, indicating that the Yum repository was built successfully. Install the Rdesktop package yum install Rdesktop–y

Finally open the Windows remote connection, right click on the computer, select Properties, open the computer system interface Click Remote Settings, select "Allow computer to run any version of Remote Desktop Connection", and then select the user, display Xiang already have access, you can use Xiang this user remote login, click OK

After testing, on the GUI of Linux system, right click to open Terminal input rdesktop Windows IP, open Windows Remote login interface, enter account and password

Linux Remote Login Windows system