Minicom Normal will be installed in the Linux server, the version generally does not need to update, can be used directly.
First, set:
1.1. Execute the minicom-s command under the Linux system and enter:
650) this.width=650; "Src=" https://s1.51cto.com/wyfs02/M00/99/B8/wKiom1lLgobjQTRpAAAgq8B_hKI072.png-wh_500x0-wm_ 3-wmp_4-s_1196089473.png "title=" Minicom-s.png "alt=" Wkiom1llgobjqtrpaaagq8b_hki072.png-wh_50 "/>
1.2. Select the third item and enter (Serial port Setup)
650) this.width=650; "Src=" https://s1.51cto.com/wyfs02/M00/99/B8/wKioL1lLgwaC8eT8AAA6On4CHOc572.png-wh_500x0-wm_ 3-wmp_4-s_3856892291.png "title=" Minicom1.png "alt=" Wkiol1llgwac8et8aaa6on4choc572.png-wh_50 "/>
1.3. There are 3 places to be aware of:
1.3.1, press a key, modify the system to identify the serial device name, the default is changed to/dev/ttyusb0, enter confirm the modification
1.3.2, press E, modify bit rate, 115200, enter confirm modification
1.3.3, press the F key, select No, enter confirm the modification
Finally, enter again to confirm that all modifications were successful
1.4, Save the configuration, select the 5th item (save Setup as DFL)
650) this.width=650; "Src=" https://s4.51cto.com/wyfs02/M02/99/B9/wKioL1lLhV7hlnHGAAAhh9i14vk981.png-wh_500x0-wm_ 3-wmp_4-s_1659366308.png "title=" 5.png "alt=" Wkiol1llhv7hlnhgaaahh9i14vk981.png-wh_50 "/>
1.5, normal exit, select the last item (exit from Minicom)
1.6, the implementation of minicom, wait 5 seconds, you can connect to the device.
650) this.width=650; "Src=" https://s4.51cto.com/wyfs02/M02/99/B9/wKiom1lLhrGTpDBEAAAviovghnw026.png-wh_500x0-wm_ 3-wmp_4-s_1954418104.png "title=" 6.png "alt=" Wkiom1llhrgtpdbeaaaviovghnw026.png-wh_50 "/>
1.7, if you want to exit Mincom terminal, press CTRL + A key, and then press the Z key, and finally press the Q key, select Yes to exit.
Second, frequently asked questions:
2.1, prompt does not allow the operation:
650) this.width=650; "Src=" https://s3.51cto.com/wyfs02/M02/99/B9/wKiom1lLiD2COAUBAAAL8RdPFcA883.png-wh_500x0-wm_ 3-wmp_4-s_3275044293.png "title=" 7.png "alt=" Wkiom1llid2coaubaaal8rdpfca883.png-wh_50 "/>
Workaround: Because minicom is being used, you can kill the system process to resolve:
[Email protected]/]# Ps-ef | grep minicom
Root 18185 17884 0 16:14 pts/1 00:00:00 minicom
Root 18283 18062 0 16:23 pts/2 00:00:00 grep--color=auto minicom
[Email protected]/]# kill-9 18185[[email protected]/]# Ps-ef | grep minicom
Root 18307 18062 0 16:25 pts/2 00:00:00 grep--color=auto minicom
2.2, with Minicom-s can not save the modified configuration:
WORKAROUND: Under the CD root directory
With the Ls-a command, you will find a hidden file named. MINIRC.DFL
Just delete the file (rm-rf. MINIRC.DFL)
Modify the parameters again to save normally.
This article is from the "1" blog, please be sure to keep this source http://7132773.blog.51cto.com/7122773/1941030
Linux Server Simple Setup minicom