Linux viewing file system types

Source: Internet
Author: User

1. Mount

[email protected] ~]$ mount
/dev/mapper/vg_tim-lv_root on/type ext4 (rw)
Proc On/proc type proc (rw)
Sysfs On/sys type SYSFS (rw)
Devpts on/dev/pts type devpts (rw,gid=5,mode=620)
Tmpfs ON/DEV/SHM type TMPFS (rw)
/dev/sda2 on/boot type EXT4 (rw)
/DEV/SDA1 on/boot/efi type VFAT (rw,umask=0077,shortname=winnt)
/dev/mapper/vg_tim-lv_home on/home type EXT4 (rw)
None On/proc/sys/fs/binfmt_misc type Binfmt_misc (rw)
None On/sys/kernel/config type Configfs (rw)
Vmware-vmblock on/var/run/vmblock-fuse type Fuse.vmware-vmblock (rw,nosuid,nodev,default_permissions,allow_other)

2.df
[Email protected] ~]$ DF-LHT
Filesystem Type Size used Avail use% mounted on
/dev/mapper/vg_tim-lv_root
Ext4 50G 17G 30G 36%/
Tmpfs tmpfs 3.9G 232K 3.9G 1%/DEV/SHM
/dev/sda2 ext4 477M 73M 379M 17%/boot
/DEV/SDA1 vfat 200M 260K 200M 1%/boot/efi
/dev/mapper/vg_tim-lv_home
Ext4 860G 726G 90G 90%/Home

3. Fdisk
[email protected] ~]$ sudo fdisk/dev/sda
[sudo] password for op:

Warning:gpt (GUID Partition Table) detected on '/DEV/SDA '! The util Fdisk doesn ' t support GPT. Use GNU Parted.


The device presents a logical sector size is smaller than
The physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance could be impacted.

Warning:dos-compatible mode is deprecated. It ' s strongly recommended to
Switch off the mode (command ' C ') and change display units to
Sectors (Command ' u ').

Command (M for help): C
DOS compatibility flag is not set

Command (M for help): U
Changing display/entry units to sectors

Command (M for help): P

disk/dev/sda:1000.2 GB, 1000204886016 bytes
255 heads, Sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * MB = bytes
Sector size (logical/physical): bytes/4096 bytes
I/O size (minimum/optimal): 4096 bytes/4096 bytes
Disk IDENTIFIER:0X2E31A2A6

Device Boot Start End Blocks Id System
/DEV/SDA1 1 1953525167 976762583+ ee GPT
Partition 1 does not start on physical sector boundary.

Command (M for help): Q

4. File
[email protected] ~]$ sudo file-s/devsda
/devsda:cannot Open '/DEVSDA ' (No such file or directory)
[email protected] ~]$ sudo file-s/dev/sda
/dev/sda:x86 boot sector; Partition 1:id=0xee, Starthead 0, Startsector 1, 1953525167 sectors, extended partition table (last) \011, code offset 0x0
[email protected] ~]$ sudo file-s/dev/sda1
/dev/sda1:x86 boot sector, MKDOSFS boot message display, code offset 0x3c, Oem-id "Mkdosfs", Sectors/cluster 8, Root ent Ries, Media descriptor 0xf8, Sectors/fat, heads 255, sectors 409600 (Volumes > MB), serial number 0x8864577 2, Label: "", FAT (+ bit)
[email protected] ~]$ sudo file-s/dev/sda2
/dev/sda2:linux Rev 1.0 ext4 FileSystem data (needs Journal recovery) (extents) (huge files)

5. Parted

[email protected] ~]$ sudo parted
GNU Parted 2.1
Using/dev/sda
Welcome to GNU parted! Type ' help ' to view a list of commands.
(parted) p
Model:ata St1000dm003-1er1 (SCSI)
disk/dev/sda:1000gb
Sector size (logical/physical): 512b/4096b
Partition TABLE:GPT

Number Start End Size File system Name Flags
1 1049kB 211MB 210MB FAT16 boot
2 211MB 735MB 524MB ext4
3 735MB 1000GB 999GB LVM

(parted) Q

6. View Fstab
[Email protected] ~]$ Cat/etc/fstab

#
#/etc/fstab
# Created by Anaconda on Tue Mar 24 02:21:26 2015
#
# Accessible filesystems, by reference, is maintained under '/dev/disk '
# See mans Pages Fstab (5), Findfs (8), mount (8) and/or Blkid (8) for more info
#
/DEV/MAPPER/VG_TIM-LV_ROOT/EXT4 Defaults 1 1
Uuid=2ce8837b-3cdc-44f0-8b8f-63b64c32a5b9/boot EXT4 Defaults 1 2
Uuid=8864-5772/boot/efi vfat umask=0077,shortname=winnt 0 0
/dev/mapper/vg_tim-lv_home/home EXT4 Defaults 1 2
/dev/mapper/vg_tim-lv_swap swap swap defaults 0 0
/dev/sdc1/mnt/mobiledisk ntfs-3g Defaults 0 0
TMPFS/DEV/SHM TMPFS Defaults 0 0
Devpts/dev/pts devpts gid=5,mode=620 0 0
Sysfs/sys Sysfs Defaults 0 0
PROC/PROC proc Defaults 0 0

Linux viewing file system types

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.