[Original] Linux Deepin 2014.1 under compile putty

On the internet for a long time, have not found Linux directly under the Putty program can be used, and finally found the source code on the Putty website click to download

Download the source code back.

1. Download source code

2. Install dependent libraries

If Libgtk2.0-dev or Libgtk3.0-dev is not installed on the system, install it using the following command

sudo Install

After the installation is complete.

Use the CD command to access the downloaded source code location

My position is

/home/sn/download/putty-0.63

3, configure the source code with the following command:

The parameters inside do not need to be changed too much, if you want to modify the installation path, use the following command (--prefix= is followed by the installation path)

./configure--prefix=/usr/bin

4. Compiling

Directly in the terminal input

Make

When the compilation is complete, output such as

5. Installation

Using commands

 Make Install

After the command execution is complete, such as:

6. Test Run effect

Enter inside the terminal

Putty

When the installation is complete, the display looks like this:

------------------------------------

Tutorial to the end, there is no understanding please leave a message

[Original] Linux Deepin 2014.1 under compile putty