Port Scanner--zenmapkail Linux penetration test

3.3Port Scanner--zenmapkail linux penetration test

zenmap (port scanner) is an open source network detection and security Audit tool. It is nmap zenmap zenmap Use of the tool this article is selected from the kail linux penetration test training manual

the instance 3-4 the Use Zenmap Tool Scan 192.168.6.0/24 all hosts within the network. The procedure is as follows:

(1) StartZenmaptools. In theKali LinuxDesktop Select Application| Kali linux|"Information collection"|"DNSAnalysis "|zenmapcommand that will display3.2The interface shown.

Figure 3.2 Zenmap Start Interface

Or, perform the following command at the terminal:

• Root@kali: ~# Zenmap

(2from this interface, you can seeZenmaptool, divided into three parts. The first part is used to specify the scan target, command, description information, the second part shows the scanned host, and the third part shows the scan details. Here inTargetenter in the corresponding text box192.168.6.0/24, and then clickScanbutton to display the3.3The interface shownThis article is selected fromKail linux penetration test training manual.

Figure 3.3 Scan Results

( 3 192.168.6.0/24 Details of all hosts in the network. In zenmap The left column shows the hosts that are active within the network, and the right column shows the nmap output information. You can also choose to view the port number, topology, host details, and so on for each host by switching tabs. For example, view host 192.168.6.1 / host, Span style= "line-height:1.5" >3.4

Figure 3.4 Host port number information

( 4 from this interface, you can see 192.168.6.1 on the host, open the the , 1900 Port. If you view the details of the host, select the host Details tab and the interface shown in 3.5 is displayed.

Figure 3.5 Host Details

( 5 from this interface, you can see the host's status, address, operating system, etc. This article is selected from Kail linux penetration test training manual .

Port Scanner--zenmapkail Linux penetration test