Port Scanner--zenmapkail Linux penetration test

3.3-Port scanner--zenmapkail linux penetration test?

The Zenmap (port scanner) is a tool for open source network probing and security audits. It is the graphical interface front-end of nmap security Scan Tool, which can support cross-platform. Use the Zenmap tool to quickly scan large networks or individual hosts for information. For example, a scan host provides those services, the operating system used, and so on. This section describes the use of the Zenmap tool in this article selected from the Kail Linux penetration test training manual .

"Instance 3-4" uses the Zenmap tool to scan all hosts in the 192.168.6.0/24 network. The procedure is as follows:

(1) Start the Zenmap tool. Select Applications in Kali Linux Desktop | Kali linux| " Information collection "|" The DNS parsing "|ZENMAP command will display the interface shown in 3.2.

Figure 3.2 Zenmap start-up interface

Or, perform the following command at the terminal:

• [Email protected]:~# zenmap

(2) From this interface can see the Zenmap tool, divided into three parts. The first part is used to specify the scan target, command, description information, the second part shows the scanned host, and the third part shows the scan details. Here, enter 192.168.6.0/24 in the Target text box and click the Scan button to display the interface shown in 3.3 This article is selected from the Kail Linux penetration test training manual .

Figure 3.3 Scan Results

(3) From this interface, you can see the details of all hosts within the 192.168.6.0/24 network. The left column of Zenmap shows the active host on the network, and the right column shows information about NMAP output. You can also choose to view the port number, topology, host details, and so on for each host by switching tabs. For example, view the host 192.168.6.1 port number/host, as shown in 3.4.

Figure 3.4 Host port number information

(4) From the interface can be seen on the 192.168.6.1 host, open the 80, 1900 ports. If you view the details of the host, select the Host Details tab and the interface shown in 3.5 is displayed.

Figure 3.5 Host Details

(5) From this interface can see the status of the host, address and operating system, etc. this article selected from the Kail Linux penetration test training manual .

Port scanner--zenmapkail Linux penetration test