Putty can connect to Linux remotely, but not on the network (NAT mode)

Source: Internet
Author: User

Say, this question has been screwing me for an afternoon = =

But finally can use NAT mode to surf the internet, or quite a sense of accomplishment

First, put a picture like this.

Prove that Putty even Linux is a problem of wood, but not on the net Oh ~ ~ ~

Please note that

the current IP is 192.168.131.128

(Why do I have to cannot it?!) Don't think I really eat enough to support the (elder sister is good, oh ~), mainly because the library is often disconnected and then re-login, so, if you use a bridge, then your IP will become change!!! )

So I had to love cuts the bridge that I loved-nat mode turned on

0, there is a big premise, first I have networkmanager this thing from the service list permanently removed, hahaha haha ~ ~ ~ (below will talk about why to take it away, first sell a Xiaoguanzi)

Operation:

(shamelessly copied from my Evernote 2 commands)

Chkconfig NetworkManager off permanently shuts down service, requires reboot

Service NetworkManager stop immediately shuts down the services and does not require a restart

Just in case, I wrote all two.

Then there is no more worries ....

1. Make sure the network adapter is set to NAT

2. Open the Virtual network editor in VMware Station

NAT settings, the gateway should be aware of

Usually the last one by default is 2, so you don't have to change your hand more.

Here's a little reminder to make sure your real machine, VMNET8, is open.

That's when you check the IP on the real machine.

If not, you can disable it and start it again (similar to restart in Linux)

It can be found that the Gateway (192.168.131.2) on Linux is the same as the network segment IPV4 this address (192.168.131.1)

################################ segmentation

Back to the virtual machine Linux

This indicates that dhclient assigned IP, is from the 192.168.131.0 began to allocate (should be 255 bar, temporarily not refined)

3. Modify the configuration file

/ETC/SYSCONFIG/NETWORK-SCRIPTS/IFCFG-ETHX (x Me here is 0, because mine is eth0)

Save, run

Service Network Restart (if your networkmanager is still there, I removed it from the beginning and may need to turn it off)

Then my putty off the net (originally 128) .... Change to 110

Can connect

View current IP

OK, no problem.

First the route, the Gateway looked up (I found that the previous 128 did not appear!) )

See the dawn of victory, Woo Woo ~ ~ ~

Test

1, Real Machine IP:

Real-machine ping virtual machine Windysai

Virtual machine Windysai Ping Real Machine

Ping Baidu

Finished ~ ~ ~

Putty can connect to Linux remotely, but not on the network (NAT mode)

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.