Solution to linux ext4 failure to use a disk larger than 16 TB

Source: Internet
Author: User

Solution to linux ext4 failure to use a disk larger than 16 TB
System Environment: Centos6.7 x86_64 updte Disk: 12*4 T raid5 + hot Description: the operating system and archive use the same RAID 5 application environment: post Office System [file size ranges from 1 K to K, except attachment] 1. View partition [fdisk-l]

[root@localhost sysadmin]# fdisk -lWARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.Disk /dev/sda: 40000.0 GB, 39999997214720 bytes255 heads, 63 sectors/track, 4863055 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x00000000   Device Boot      Start         End      Blocks   Id  System/dev/sda1               1      267350  2147483647+  ee  GPT

 

Note: At this time, the file system has exceeded 16 TB, and OS converts it to GPT format by default. Therefore, you cannot view accurate partition information using fdisk. Ii. Use parted to view partition information
[root@localhost sysadmin]# partedGNU Parted 2.1Using /dev/sdaWelcome to GNU Parted! Type 'help' to view a list of commands.(parted) p                                                               Model: LSI AOC-USAS2LP-H8iR (scsi)Disk /dev/sda: 40.0TBSector size (logical/physical): 512B/512BPartition Table: gptNumber  Start   End     Size    File system     Name      Flags1      1049kB  525MB   524MB   ext42      525MB   263GB   262GB   ext43      263GB   284GB   21.0GB  ext44      284GB   288GB   4295MB  linux-swap(v1)

 

3. Divide the remaining space into/archive as the root directory of the archive
(parted)  mkpart /archive 288G -1(parted) p                                                             Model: LSI AOC-USAS2LP-H8iR (scsi)Disk /dev/sda: 40.0TBSector size (logical/physical): 512B/512BPartition Table: gptNumber  Start   End     Size    File system     Name      Flags1      1049kB  525MB   524MB   ext42      525MB   263GB   262GB   ext43      263GB   284GB   21.0GB  ext44      284GB   288GB   4295MB  linux-swap(v1)5      288GB   40.0TB  39.7TB                  /archive(parted)q

 

4. view the partition [root @ localhost ~] # Fdisk/dev/sdasda sda1 sda2 sda3 sda4 sda5 [root @ localhost ~] # Note: A New partition [sda5] has been found. 5. Modify/etc/mke2fd. conf.
# Vim/etc/mke2fs. conf [fs_types] ext3 = {features = has_journal} ext4 = {features = has_journal, extent, huge_file, flex_bg, inline, dir_nlink, inline auto_64-bit_support = 1 # Add this line of inode_size = 256}

 

Download e2fsprogs-1.42.13.tar.gz
[root@localhost ~]# wget -c http://jaist.dl.sourceforge.net/project/e2fsprogs/e2fsprogs/v1.42.8/e2fsprogs-1.42.13.tar.gz[root@localhost e2fsprogs-1.42.13]# pwd/home/sysadmin/e2fsprogs-1.42.13[root@localhost e2fsprogs-1.42.13]# cd build/[root@localhost build]# ../configure....[root@localhost build]# make && make install

 

7. Format partitions
[root@localhost ~]# mke2fs -O 64bit,has_journal,extents,huge_file,flex_bg,uninit_bg,dir_nlink,extra_isize -i 2048  /dev/sda5[root@localhost build]# blkid/dev/sda1: UUID="908a3c8e-6d6a-4e01-8cad-2094ea99751f" TYPE="ext4"/dev/sda3: UUID="b533714f-4cb9-4394-907d-8d1ead424c85" TYPE="ext4"/dev/sda2: UUID="0a0ec20e-b50b-4d89-9fa6-65602e4e8a3d" TYPE="ext4"/dev/sda4: TYPE="swap" UUID="b8e89719-670f-4b26-bbf3-86d13a1f935e"/dev/sda5: UUID="3b5789ee-94c2-4296-bd99-5669200d826a" TYPE="ext4"

 

Note: mke2fs format description:-B <block size>: Specifies the block size, in bytes;-c; check for damaged blocks;-f <size of discontinuous blocks>: specify the size of the inconsecutive segment, in bytes;-F: enforces mke2fs regardless of the specified device;-I <byte>: Specifies the ratio of "Byte/inode; -N: specifies the number of inode to be created.-l <File>: reads information about damaged blocks in the west of the file from the specified file.-L <tag>: set the tag name of the file system.-m <percentage value>: Specifies the ratio of the blocks to be reserved by the Administrator. The default value is 5%.-M: records the last mounted directory.-q: -r: Specifies the version of the ext2 file system to be created;-R = <number of blocks>: sets disk array parameters;-S: write only superblock and group descriptors without changing inode able inode bitmap and block bitmap;-v: displays details during execution;-V: displays version information. . 8. Mount the corresponding partition.
[root@localhost build]# df -hFilesystem      Size  Used Avail Use% Mounted on/dev/sda3        20G  2.4G   16G  14% /tmpfs           7.8G     0  7.8G   0% /dev/shm/dev/sda1       477M   80M  372M  18% /boot/dev/sda2       241G  120M  228G   1% /home/dev/sda5        36T   20K   34T   1% /archive[root@localhost build]# df -iFilesystem         Inodes IUsed      IFree IUse% Mounted on/dev/sda3         1281120 91214    1189906    8% /tmpfs             2040386     1    2040385    1% /dev/shm/dev/sda1          128016    46     127970    1% /boot/dev/sda2        16007168  1955   16005213    1% /home/dev/sda5      4293781536    11 4293781525    1% /archive

 

9. view disk Information
[root@localhost build]# tune2fs -l /dev/sda5tune2fs 1.42.13 (17-May-2015)Filesystem volume name:   <none>Last mounted on:          <not available>Filesystem UUID:          3b5789ee-94c2-4296-bd99-5669200d826aFilesystem magic number:  0xEF53Filesystem revision #:    1 (dynamic)Filesystem features:      has_journal ext_attr dir_index filetype needs_recovery extent 64bit flex_bg sparse_super huge_file uninit_bg dir_nlink extra_isizeFilesystem flags:         signed_directory_hashDefault mount options:    user_xattr aclFilesystem state:         cleanErrors behavior:          ContinueFilesystem OS type:       LinuxInode count:              4293781536Block count:              9695327232Reserved block count:     484766361Free blocks:              9426221107Free inodes:              4293781525First block:              0Block size:               4096Fragment size:            4096Group descriptor size:    64Blocks per group:         32768Fragments per group:      32768Inodes per group:         14512Inode blocks per group:   907Flex block group size:    16Filesystem created:       Thu Oct 15 15:27:56 2015Last mount time:          Thu Oct 15 15:33:50 2015Last write time:          Thu Oct 15 15:33:50 2015Mount count:              1Maximum mount count:      33Last checked:             Thu Oct 15 15:27:56 2015Check interval:           15552000 (6 months)Next check after:         Tue Apr 12 15:27:56 2016Lifetime writes:          202 MBReserved blocks uid:      0 (user root)Reserved blocks gid:      0 (group root)First inode:              11Inode size:               256Required extra isize:     28Desired extra isize:      28Journal inode:            8Default directory hash:   half_md4Directory Hash Seed:      56a5949a-5a49-4bc9-810d-9a9e2aa2109bJournal backup:           inode blocks

 

 

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.