VMware Network Settings
1.bridged (Bridging mode)
If more than one IP address is available on the network, a bridging method is used. The IP addresses of the virtual machine and the host are independent of each other.
2.NAT (network address translation mode)
If only one IP address is available, use NAT mode. However, the external computer cannot access the virtual machine.
3.host-noly (host mode)
Use host mode if the host is not connected to an external network. Enables virtual machines to communicate with hosts.
Linux Network Settings
1.ifconfig Viewing network adapter
2./etc/init.d/network Restart Restart the NIC
3.service NetworkManager stop shutdown Network Management Service
Eth0: Ethernet Card
Lo: Loopback nic
Virbr0: Virtual Bridge
NIC configuration file
/etc/sysconfig/network-scripts/ifcfg-eth0
Where the Onboot option indicates whether to start
[state-Embedded notes] [007] [Linux Network Configuration]